All New LaForge FatShark RX 5.8GHz Main Module V4 w/ Diversity Module

4.65 1

Regular Price: $119.99

Special Price $109.99

LaForge FatShark RX 5.8GHz Main Module V4 w/ Diversity Module doors Included

All New with Version 4!!!
New features include:

Full Graphics OSD: That’s right, everything that is displayed on the OLED will now be mirrored on the micro-displays in the form of an OSD.

USB Support: There is an entirely new graphical user interface for updating firmware and making custom settings. The module can be powered via USB and used as a real time spectrum analyzer which will appear on your computer’s display.

Microphone: A small microphone replaces the IR Emitter. The pilot may select this microphone from the settings menu to record pit audio over their DVR footage. This microphone has a low gain and should be adjusted in post production to increase the volume.

LED Control: For those advanced users, we have made a data pad available that will control a series of LEDs. An external 5v source will be needed and left up to the pilot to tap into. It will be well worth the mod to really push customization options over the top.

Version 4 Diversity module is required with the v4 Main Module in order to utilize the speaker. If you choose not to upgrade your diversity module you will need to remove the speaker from the v2 or Lower Diversity module.

What's in the box?
1x LaForge Main Module v4
1x Main Module Molded door
1x 90° SMA
1x LaForge Diversity Module v4
1x Diversity Module Molded door
1x 45° SMA
1x Diversity Crossover cable

OR
  • DESCRIPTION
  • REVIEWS
  • LaForge FatShark RX 5.8GHz Main Module V4 w/ Diversity Module

    The Main Module is a 5.8GHz spectrum scanner with OLED display and a load of features that will forever change the way you FPV.

    Designed exclusivly for the Fat Shark module bay. With this main module you will immediately have the power to quickly tune into your crafts channel, or scan the spectrum to find a free channel, or even tune into a friends channel.

    But it doesn't stop there; add the Diversity Module for an even more reliable FPV experience or get the Transmitting Module that can quickly bind to the Main Module.

     

    VRX Module

    Custom engineered VRX module with dual 5.8GHz filter capable of receiving the cleanest RF signal.

     

    OLED Screen

    Crystal clear 128 x 64 pixel OLED can be seen in daylight and night.

     

    Buttons

    Three dedicated buttons make menu navigation simple. Only found on the official La Forge V2 main module.

     

    Diversity Port

    Add the Diversity Module and extend your flying range by using a directional antenna paired with an omni-directional.

     

    IR Emitter

    Quickly transfer all settings to the Transmitting Module with our Quick-Bind infrared protocol.

     

    Firmware

    We are constantly improving the firmware to give you the best performance of any receiver on the market.

     

    All New with Version 4!!!

    New features include:

     

    Full Graphics OSD: That’s right, everything that is displayed on the OLED will now be mirrored on the micro-displays in the form of an OSD.

     

    USB Support: There is an entirely new graphical user interface for updating firmware and making custom settings.  The module can be powered via USB and used as a real time spectrum analyzer which will appear on your computer’s display.

     

    Microphone: A small microphone replaces the IR Emitter.  The pilot may select this microphone from the settings menu to record pit audio over their DVR footage.  This microphone has a low gain and should be adjusted in post production to increase the volume.

     

    LED Control: For those advanced users, we have made a data pad available that will control a series of LEDs.  An external 5v source will be needed and left up to the pilot to tap into.  It will be well worth the mod to really push customization options over the top.

     

    Version 4 Diversity module is required with the v4 Main Module in order to utilize the speaker.  If you choose not to upgrade your diversity module you will need to remove the speaker from the v2 or Lower Diversity module.

     

    What's in the box?

    1x LaForge Main Module v4

    1x Main Module Molded door

    1x 90° SMA

    1x LaForge Diversity Module v4

    1x Diversity Module Molded door

    1x 45° SMA

    1x Diversity Crossover cable

     

     

    Technical Specifications

    Product Manual

    Download

     

    Available Firmwares

    Main Firmware
    RF Analyzer
    RF Lap Timer
    Capture & Defend
    rx5808-pro-diversity (Open Source)

     

    Size

    length 42.1mm, width 29.5mm, height 8mm (excluding header pins.)

     

    Status LEDs

    Indicates power (red), status (blue) and if receiver is active (green).

     

    IR Emitter

    • Requires line of sight to the VTX IR detector.
    • Short operating range of 10-20mm.
    • Payload sent 2 times every second.

    Firmware Features

    • Favorites Mode Quickly switch between you favorite channels and store up to 40.
    • Manual Mode Select exactly which channel you want to be on.
    • Band Scan Mode Bar graph showing the entire 5.8Ghz spectrum.
    • Spectate Mode Scan the 5.8Ghz spectrum for strong signals.
    • Screen Saver Display current channel, call sign, and signal strength.
    • Settings Menu Change channel order, call sign, calibrate RSSI, sounds, diversity settings, and vtx settings.
    • Quick Save Press and hold the select button for 2 seconds to save all current settings for next boot cycle.

    Receiver

    40 channel receiver.
    Designed around a custom vRX module only found on LaForge FPV Products. High sensitivity dual filtered 5.8GHz module.

     

    Power

    4.25v-5.0v input voltage only.

     

    Compatibility

    Fat Shark Goggles

    • Dominators
    • Dominator V2
    • Dominator V3
    • Dominator SE
    • Dominator HD
    • Dominator HD V2
    • Dominator HD V3
    • Attitude V3 - Some modification required.

    Channel Mappings

    Band 1 2 3 4 5 6 7 8
    A 5865 5845 5825 5805 5785 5765 5745 5725
    B 5733 5752 5771 5790 5809 5828 5847 5866
    E 5705 5685 5665 5645 5885 5905 5925 5945
    F / Airwave 5740 5760 5780 5800 5820 5840 5860 5880
    C / Raceband 5658 5695 5732 5769 5806 5843 5880 5917
    *L / Low Band 5362 5399 5436 5473 5510 5547 5584 5621

    * Although it is legal to receive L Band frequencies; they are illegal to transmit on in the USA. Please respect and obey your local laws. These frequencies need to be enabled in the v2.0 firmware settings.

     

    The Diversity Module is an additional 5.8GHz receiver with status LEDs buzzer and wiring harness.

    Adding a secondary receiver gives another layer of reliability and allows for different types of antennas to be used simultaneously so you can feel confident you are getting the best signal. Finally a Fat Shark diversity module that works.

    When plugged into the Main Module, the Diversity Module is automaticly detected and ready to use without any firmware flashing.

     

    VRX Module

    Custom engineered VRX module with dual 5.8GHz filter capable of receiving the cleanest RF signal.

     

    Plug & Play

    Plug the supplied wireing harness directly into the diversity port of the Main Module.

     

    Beeper

    Add audio confirmation to button presses and antenna switching.

     

    Technical Specifications

    Size

    length 39.5mm, width 23.5mm, height 6mm
    Wiring Harness - 10cm in length

     

    Status LEDs

    Indicates power (red) and if receiver is active (green).

     

    Firmware Features

    • Diversity Menu Select which antenna to use & switching speed.
    • Auto Detect Firmware automaticly detects when diversity module is plugged in.

    Receiver

    40 channel receiver. 
    Designed around a custom vRX module only found on LaForge FPV Products. High sensitivity dual filtered 5.8GHz module.

     

    Power

    4.25v-5.0v input voltage only.

     

    * A few users have reported burnt ribbon cables while using the Diversity Module. In all instances these goggles were opened up or modified in some way. LaForge FPV and UBAD do not recommend modding your goggles. Modding your goggles will void your fat shark warranty. User installs Diversity Module at their own risk.

  • Customer Reviews

    Again, The Best Module in FPV!

    As the iteration of this product keeps coming in, the innovation and research behind it gets better than it's predecessor. Build quality is better than my v3, with heftier solder which is more rigid and feels comfortable about not breaking it. The UI is is somewhat new but familiar if you had the last version. Buttons feels firm and precise with each click. The biggest advantage to this new version is the OSD configuration inside your goggles so you don't need to take them off to make changes. This is by far my reason to upgrade. I have had all of the versions from Bruce and his team and they are prompt in helping you out if you need it. Partnered with Hel-Nation, you will have a great product support if you decide on this product. Review by JediDrift • (Posted on 2/23/2018)
    Quality
    Price
    Value

    Write A Review For All New LaForge FatShark RX 5.8GHz Main Module V4 w/ Diversity Module

    How do you rate this product? *

    • Quality
    • Price
    • Value