Toray T700 Quick-Release Arm Upgrade 15/08/2018
After much feedback from you guys, we decided to do a redesign on the Yeti arm. Loads of guys wanted the same quick release option like its skinnier brother Lycan.
We went ahead did the rework to incorporate the quick-release functionality and at the same time we upgraded to a much, much stronger grade of carbon for the arms. We chose Toray T700 carbon for the arms and finished the arms off with a very subtle chamfered edge, this is a small finishing detail but it works really well for the part.
We have also incorporated zip-tie slots for the battery lead on the main base plate and added some new chamfering and counter-bored details in there too.
Let us know what you think? Any comments or feedback is much appreciated, mail us directly at email@example.com
Hope you enjoy, Dave
Yeti pre-order 07/05/2018
Yeti will be on pre-oreder for the next 4 weeks. Pre-orders will be couriered out to clients on the 6th June 2018.
Customers doing pre-order frames do get free extras included in their kits and will also receive the all new FridayFPV Huggy Bear battery strap! This isn't a regular battery strap, keep an eye out for more details on this product to be released soon.
We will also be releasing details about new printed covers and camera protection options for Yeti in the next couple weeks. These prints will be available on the store for purchase or if you have access to a 3-D printer, the STL files will also be available for free download.
Yeti, is a blend between the raw brute strength of Taboo and the simplicity and light weight of Apex. As with Taboo, you can still drive a car over it, but it now comes with a 30% weight saving.
Yeti is a 215mm MTM, stretched-X design, weighing in at 73grams with the titanium fastener pack and 80grams with the standard stainless steel fastener pack.
This frame features full 3mm thick front and rear side plates and a 3mm thick base plate, 4 individual arms are a 3 bolt pattern and 4mm thick.
This frame features a full 35mm internal cavity for protecting your quadruple electronics stack and space to fit either mini, micro or nano cameras.
You gain easy access to your stack by flipping the two top rails of the frame up.
Yeti has is a really good all-round frame for racing, freestyle and long-range. There will be a 7” option coming soon for the guys looking for a simple reliable long range frame.
(For the full story and prototyping phase of this frame see below)
We have had loads of comments from loyal customers about not wanting to wait the 4 week pre-order we run on first release for our frames! We do this to give ourselves a little extra time to make sure we get your order correct, mistakes do happen, especially when you are releasing a new product, we do our utmost to make sure mistakes don’t happen.
For you guys who cannot wait for pre-order and want Lycan right now, we have introduced pre-production. These frames are identical to the pre-order frames which will be released, without the chamfered edging and finishing of production frames.
These are the exact same frames our team pilots fly!
We will release a very limited number of these frames before we do our pre-orders.
If this option is for you keep in contact with us and up-to-date, to find out exact release dates. Obviously, loyal customers who truly believe in our products and what we do, get extras and a small discount when they take a pre-production frame from us.
Included in the Kit
4 x 4mm carbon fibre arms (Toray T700 UD Carbon)
2 x 2mm carbon fibre top chassis plates
1 x 3mm carbon fibre main chassis plate
2 x 3mm carbon fibre camera side plates (notched to indicate cam angle)
2 x 3mm carbon fibre rear side plates
4 x 16mm M3 button cap bolts
8 x 12mm M3 button cap bolts
2 x 8mm M3 button cap bolts
4 x M3 aluminium nylock nuts
2 x 16mm aluminium standoff
6 x press nuts
Fasteners have been matched up together in separate packets to make it easier to assemble the frame.
1 x Battery Pad (low density foam, keeps it light, self-adhesive backing keeps it in place)
1 x Zip-tie pack
For the guy’s conscious of weight for racing, component selection is key and a minimalistic approach to your build is key.
As this frame is a multi-role platform recommending a AUW here would be pointless, obviously a lighter frame for long range will get you further, for racing a lighter frame may be what you are looking for or perhaps you like the feel and flight characteristics of a frame with a bit more weight behind it.
Yeti is designed to take a quadruple electronics stack, either 20x20mm or 30x30mm, and either a 14x14mm, 19x19mm, or mini 22x22mm camera.
Please contact us, we would love to hear from you!
If you have any questions or comments, or you would like to get more details and info about Lycan or anything else we do, please get hold of us, else email us at firstname.lastname@example.org
We do understand that nothing in this life is perfect, but we do constantly try to improve, refine and better what we have done previously. We would love to hear your experience, both good and bad.
The Full Story
Yeti was designed for team pilot Joe Venter, AKA slojoefpv. Joe is an amazing pilot and his main focus is racing, but even now and then Joe likes to take a break from racing and just cruise!
Joe said to me he wanted something that was tough for racing and he wasn’t too concerned if it wasn’t the lightest racer out there, he actually enjoyed how a frame flew with a little extra weight.
This was cool for me, as we have been doing a bunch of prototyping lately, probably a year or so now, an almost entirely the focus has been weight. Joe really enjoys creating content, YouTube and Instagram in particular, and he has mentioned a couple times he would like a frame for carrying an HD camera on scenic and long range missions. This seemed like the perfect opportunity to combine a tough, simple race frame with the flexibility and HD camera carrying capability of a freestyle frame.
Joe said he was looking for something with the strength and toughness of Taboo and the light-weight and simplicity of Apex. So, this is where we started, give it 4 individual arms, a tough and protective exterior which would protect your quadruple high stack in the centre and offer options for carrying extra equipment, sensors and a full HD camera if you wanted.
We went back and forth a couple times and then I finally came up with an idea which I thought would work, not so! We busted up and destroyed about 4 prototypes before we even came close to what Joe was looking for. Another 3 or so prototypes were designed and tested each time tweaking and refining to get to the final production version of what we now know to be Yeti.
Joe has also been testing out some add-on extras for the frame, namely printable pods, fairings for racing and also some GoPro session mounts for long range and freestyle. When we have some more details available on these we will make them available on the store and put up the STL files so everyone can download and print their own files at home.
Hope you enjoy.
fpv, racing drone, freestyle drone, camera drone, flight controller, esc, vtx, video transmitter, drones, video drone, drone with camera, mini drone, fpv drone, rc drone, quadcopter drone, fast drone, quadcopter, kwad, brushless motors, props, propellers, fpv camera, lipo battery, lipo, talon, fpv antenna, team blacksheep, fc, tiny whoop, toothpick, 5” quad, fpv goggles, fatshark, frsky, x9d, qx7, tbs, brainfpv, radix, talon nfg, talon faf, rakon, rakonheli, tattu, tattu rline, emax, aikon, gigawatt, first person view, kiss, new fpv products, fpv drone racing kit, fpv store, fpv drone rtf, fpv equipment, fpv parts, drone racing, fpv transmitter, matek, drl, Armattan, Armattan marmot, multigp, racing drone store, fpv racing quadcopter, rotor riot, hqprop, best fpv racing drone, gemfan, happymodel, furious fpv, tinyhawk, caddx, drone racing batteries, tattu fpv lipo battery, racing frames, motors & escs, fpv gear & accessories, fpv racing quad, drone racing league, racing drone build kit, drone BNF, Taranis, bnf racing drone, pnp drone, best bnf drones, getfpv, hyperlite, gnarlyfpv, gnarlyfpv primo, lil deuce, best drone website, best drone store, stores that sell drones, foxeer, runcam, cobra motors, jumper, jumper t16, rotor x, ethix, best fpv racing drone, fpv cameras, immersionrc, rapidfire, laforge, true d, dr1, tbs tango, frsky x-lite, talonfpv, whitenoise fpv, team black sheep, talon fc, talon flight controller, brainfpv radix, brainfpv radix li, tmotor, t-motor, r-line 3.0, rcinpower, iflight, tbs triumph, kiss v2, slaytech, micro drone, micro racing drone, true rc, vas, tbs source one, tbs source 2, graphene, foxeer predator, foxeer box, emax buzz, betafpv, happymodel sailfly, firefly, axii, talon stack, talon 20X20, micro brushless, micro brushed, hobbywing, shen drones, shendrones, shen drones squirt, ts80, ts100, rc solder, rc soldering, caddx eos, caddx ratel, eachine, lumenier, tmotor f40, tmotor f20, synergy fc, isdt, mobula 7, mobula7, crossfire, tbs crossfire, tbs crossfire tx, tbs crossfire rx, tiny leds, gemfan hurricane, shen drones nutmeg, vifly, brain 3d, brain3d, babyhawk, emax props, floss 3.0, toothpick motors, 65mm props, hq micro prop, 31mm props, 40mm props, mr steele, nd8, nd4, nd16, fridayfpv, team nugen, airblade uav, crazybee, alienwhoop, zer0, alienwhoop zer0, alienwhoop zero, quad battery, drone battery, racing drone battery, Talon F4, Talon F7, Talon Gigawatt, electronic speed controller, Tiny Whoop Nano, Newbeedrone, micro quad, micro fpv camera, trued x, iflight xing, matek, spedix, foxeer predator v4, foxeer predator micro v4, 1s batteries, 2s batteries, 3s batteries, 4s batteries, 5s batteries, 6s batteries, micro gear, micro fpv gear, pre-built quads, emax tinyhawk accessories, spedix rex 80 impulse rc, impulserc, impulse rc alien, impulse rc reverb, whoop batteries, micro mini vtxs, micro props, newbeedrone cockroach, impulserc alien, impulserc reverb, micro video gear, vtx pigtail, unify pro, tbs unify pro vtx, unify pro nano, unify pro hv, sma, rp-sma, sma antenna, rp-sma antenna, tbs powercube, foxeer falkor, tbs diamond antenna, video aerial systems, shape shifter, shapeshifter, inductrix, idtx, vas ion, vas crosshair, micro fpv camera, mini fpv camera, groundstation, fc esc stack, ground station, clearview, aikon ak32, aikon ak32pin, spedix gs40, spedix gs25, gps, gps module, gps modules, 1s battery, 2s battery, 3s battery, 4s battery, 5s battery, 6s battery, pdb, osd, vtx osd, Armattan rooster, Armattan chameleon, airbot, caddx firefly, crossfire nano rx, dsmx, ethix facehugger, ethix neck strap, fxt, heli-nation talon, helination, tomoquad, ethix watermelon, GNB, GNB Batteries, Pyro-Drone, dys, project 399, project399, flyduino, hypylite, catalyst Machineworks, raging droner, brother hobby, azure, azure johnnyfpv, cnhl, campfire quads, strixrc, strix, menace rc, ummagawd, flynoceros, dal prop, dal props, team neugen, mqtb, hglrc, hobbywing, airblade, xhover, mode 2, astrox, konasty, hota, sunnysky, motolab, ritewing, mini drak, apc props, raceflight, flight one, revolt, millivolt, cl racing, undergroundfpv, undergroundfpv nirvana, battery strap, best lipo, best flight controller, emax eco, emax eco motor, foxeer predator micro, foxeer predator 4, tbs triumph pro, triumph pro, tbs stardust, tbs pro 32 hv, pro32 hv, unify pro32 hv, crossfire tx, crossfire rx