Hobbywing XRotor Micro 12A for 150mm FPV Pilots (1-4S) 4in1 ESC

$32.99

For FPV Drone Racing 4inONE

4IN1 ESC w/BEC - Super Small & Light architecture
Well-designed core program with all parameters adjusted to the optimum saves all the trouble of parameter adjustment
Smaller size & lighter weight for smaller-size multirotors/drones.
Multiple output ports for powering different accessories such as picture transmission module, camera and LED lights and etc.
Amp/Volt monitoring port for flight controller monitoring Amp/Volt in real time (the FC needs to support time function, XRotor 12A 4IN1 Micro without this).
One-Shot125 signal-receiving mode with a real-time signal frequency of up to 3800Hz supported.
One-Shot42 signal-receiving mode supported.
MultiShot signal-receiving mode supported.
DEO (Driving Efficiency Optimization) technology significantly reduces the ESC temperature, improves the throttle response, and strengthens the stability and flexibility of multi-rotors. (Note: this ESC is quite suitable for QAVs.) • Active braking (brought by DEO technology) for quicker deceleration when reducing the throttle amount.
Motor direction is switchable between CW and CCW through the transmitter.
Braking function allows the motors to quickly stop spinning when the throttle stick is moved to the bottom position.
Compatible with various flight controllers and supports a PWM signal frequency of up to 621Hz in “Regular” signal-receiving mode.
Intelligent motor lock-up protection for protecting the motor and the ESC.

OR
  • DESCRIPTION
  • REVIEWS
  • For FPV Drone Racing 4inONE

    • 4IN1 ESC w/BEC - Super Small & Light architecture
    • Well-designed core program with all parameters adjusted to the optimum saves all the trouble of parameter adjustment 
    • Smaller size & lighter weight for smaller-size multirotors/drones.
    • Multiple output ports for powering different accessories such as picture transmission module, camera and LED lights and etc.
    • Amp/Volt monitoring port for flight controller monitoring Amp/Volt in real time (the FC needs to support time function, XRotor 12A 4IN1 Micro without this).
    • One-Shot125 signal-receiving mode with a real-time signal frequency of up to 3800Hz supported.
    • One-Shot42 signal-receiving mode supported.
    • MultiShot signal-receiving mode supported.
    • DEO (Driving Efficiency Optimization) technology significantly reduces the ESC temperature, improves the throttle response, and strengthens the stability and flexibility of multi-rotors. (Note: this ESC is quite suitable for QAVs.) • Active braking (brought by DEO technology) for quicker deceleration when reducing the throttle amount.
    • Motor direction is switchable between CW and CCW through the transmitter.
    • Braking function allows the motors to quickly stop spinning when the throttle stick is moved to the bottom position.
    • Compatible with various flight controllers and supports a PWM signal frequency of up to 621Hz in “Regular” signal-receiving mode.
    • Intelligent motor lock-up protection for protecting the motor and the ESC.
     
     
    Model
    XRotor Micro 40A 4in1 BLHeli-S DShot600
    SKU
    30901041
    Application FPVs with 130-280mm Diagonal Wheelbase
    LiPo Power input 1S-4S
    Cont.Current
    12Ax4
    Burst Current 18Ax4
    BEC Output
    5V & 1A
    Input wires 18AWG-100mm* (Red/Black)
    Output Wire solder tabs
    Connectors
    (In/Out)
    no 
    Weight / Size 8g / 38.1x37.9x5.3mm
    Firmware HW Special Program for FPVs
       
    Throttle Calibration Supported
    ESC Programming Stick Programming
    DEO Supported
    OneShot Mode Supported
    Timing No
    Motor Rotation Supported

    * Note: All the wire length above is the original length, not the length you see from the outside.

    XRotor Micro 4in1 ESC for FPV pilots

    Meet XROTOR "M" Series - 4 in 1 ESC

    XROTOR ESC - 4in1 series

     
     
    Model
    40A FPV   12A  FPV
     
     
    SKU
    30901076 30901041
      BLHeli-S DShot600 HW Special Program for FPVs
    Application FPVs with 130-280mm
    Diagonal Wheelbase
    FPVs with 150=mm
    Diagonal Wheelbase
    Firmware BLHeli-S A-H-50 16.5 HOBBYWING
    LiPo Power input 2-5S Lipo 1-4S LiPo
    Cont.Current
    40Ax4 12A×4
    Burst Current 50Ax4 18A×4
    BEC Output 5V & 1.5A 5V,1A
    Input wires 14AWG-130mm 18AWG-100mm (Red/Black)
    Output Wire No wires but solder tabs

    No wires but solder tabs

    Connectors
    (In/Out)
    XT60 (w/ Wires Soldered on) no 
    Weight / Size 10g / 42.6x36x4mm 8g / 38.1x37.9x5.3mm

    * Note: All the wire length above is the original length, not the length you see from the outside.

  • Write A Review For Hobbywing XRotor Micro 12A for 150mm FPV Pilots (1-4S) 4in1 ESC

    How do you rate this product? *

    • Price
    • Value
    • Quality