Hobbywing XRotor Micro 40A 2-5S 4in1 BLHeli-S DShot600 ESC

5 1

Regular Price:

$59.99

XRotor Micro 40A 4in1 BLHeli-S DShot600

FEATURES
Firmware - BLHeli-S A-H-50 16.5
ESC Programming - Stick Programming, BLHeliSuite
Stick Programming - Supported
DEO - Supported
Throttle Range Calibration - Supported
Oneshot125 Mode - Supported
Oneshot42 Mode - Supported
MultiShot Mode - Supported
DShot150/300/600 - Supported
Timing - Supported
Motor Rotation - Supported

SPECIFICATIONS
Product Name - XRotor Micro 40A 4in1 BLHeli-S DShot600
Cont./Peak Current - 40Ax4/50Ax4
Input Voltage - 2-5S Lipo
BEC output - 5V & 1.5A
Input Wires - Red-14AWG-130mm / Black-14AWG-130mm
Output Wires - No wires but solder tabs
Input Connectors - XT60 (w/ Wires Soldered on)
Output Connectors - No
Size & Weight - Size - 42.6x36x4mm | Weight - 10g
Applications - 130-280mm FPVs

OR
  • DESCRIPTION
  • REVIEWS
  • XRotor Micro 40A 4in1 BLHeli-S DShot600

    FEATURES

    • Firmware - BLHeli-S A-H-50 16.5
    • ESC Programming - Stick Programming, BLHeliSuite
    • Stick Programming - Supported
    • DEO - Supported
    • Throttle Range Calibration - Supported
    • Oneshot125 Mode - Supported
    • Oneshot42 Mode - Supported
    • MultiShot Mode - Supported
    • DShot150/300/600 - Supported
    • Timing - Supported
    • Motor Rotation - Supported

    SPECIFICATIONS

    • Product Name - XRotor Micro 40A 4in1 BLHeli-S DShot600
    • Cont./Peak Current - 40Ax4/50Ax4
    • Input Voltage - 2-5S Lipo
    • BEC output - 5V & 1.5A
    • Input Wires - Red-14AWG-130mm / Black-14AWG-130mm
    • Output Wires - No wires but solder tabs
    • Input Connectors - XT60 (w/ Wires Soldered on)
    • Output Connectors - No
    • Size & Weight - Size - 42.6x36x4mm | Weight - 10g
    • Applications - 130-280mm FPVs
  • Customer Reviews

    Will be using this on all my builds from now on

    I'm done using individual ESCs. This thing rocks. Every other 4-in-1 ESC I've seen has had some deal-breaker issue for me. Either it doesn't have a 5V regulator, or it doesn't have current sensing (won't fly without current sensing anymore), or the pads extend way outside the 30.5mm footprint, or it will only mount sideways, etc. This ESC gets everything right. It doesn't extend past the limits of the stack except for the battery tab, which is small. It has current sensing. It has a 5V regulator. It has motor pads at a slight angle for a cleaner install. It is the only ESC I will ever use in my builds from here on out unless I don't have a choice, or until something better comes along, which would be pretty hard to do. Review by SwissFreek • (Posted on 1/21/2018)
    Quality
    Price
    Value

    Write A Review For Hobbywing XRotor Micro 40A 2-5S 4in1 BLHeli-S DShot600 ESC

    How do you rate this product? *

    • Quality
    • Price
    • Value