Hobbywing XRotor Nano F4 Flight Controller w/OSD for FPV Drone Pilots

Regular Price:

$48.00

Flight Controller that works, period

STM32 F405 MCU allows the FC to run the PID looptime and gyro with higher frequency.
SPI Sensor MPU6000 includes an accelerometer and a gyro.
Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race.
TF-card which can record and save more flight/black box data allows users to adjust the setup of their aircraft easily.
Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc.
LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.
Volt/Amp monitoring port allows users to check the battery voltage ( VBAT+ port ) and current (CRT port) (extra current meter is needed).
Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.
Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters)

OR
  • DESCRIPTION
  • REVIEWS
  • Flight Controller that works, period

    • STM32 F405 MCU allows the FC to run the PID looptime and gyro with higher frequency.
    • SPI Sensor MPU6000 includes an accelerometer and a gyro.
    • Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
    • The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race.
    • TF-card which can record and save more flight/black box data allows users to adjust the setup of their aircraft easily.
    • Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc.
    • LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.
    • Volt/Amp monitoring port allows users to check the battery voltage ( VBAT+ port ) and current (CRT port) (extra current meter is needed).
    • Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.
    • Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters) 
    Download
     
    Model
    Nano F4 Flight Controller F4
    SKU
    31001001
    Application FPVs with 130 Diagonal Wheelbase or below
    FC Programming supported
    Programming via
    Betaflight/Cleanflight-configurator
    Compatible with (Modes) PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300,
    Dshot600, Dshot1200, Proshot1000
    Compatible with (Transmitters)
    PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
    OSD Buit-in
    Voltage Monitoring Supported
    Current Monitoring Supported
    External Buzzer Supported
    LED Control Supported
    BEC 5V @ 1.5A
    USB Port MicroUSB
    size/ weight 27x27mm / 3.3g
  • Write A Review For Hobbywing XRotor Nano F4 Flight Controller w/OSD for FPV Drone Pilots

    How do you rate this product? *

    • Quality
    • Price
    • Value