1 - 16 of 22

Page:
  1. 1
  2. 2
  • Cobra Motor CP2814/8 Kv=1800 Outrunner Brushless Motor for Flying Wings

    Regular Price:

    $52.99

    Cobra Champion Series For Wings:

    Compared with C2814, there are several obvious differences in CP2814 shown below:

     

    1. As one family member of Cobra Champion series, CP2814 also uses the highest ranked magnet as other Champion FPV racing motors do.  With improved design of the electromagnetism, CP2814 can excavate all proficiency of the high ranked magnets.

     

    2.  CP2814 increases the Max. Current and Max. Power by at least 15% based on the same setup of C2814.  

     

    3.  CP2814 increases the efficiency by about 5%, which means longer flight time.

    Out of stock

  • Cobra Motor CP2814/6 Kv=2350 Outrunner Brushless Motor for Flying Wings

    Regular Price:

    $52.99

    Cobra Champion Series For Wings:

    Compared with C2814, there are several obvious differences in CP2814 shown below:

     

    1. As one family member of Cobra Champion series, CP2814 also uses the highest ranked magnet as other Champion FPV racing motors do.  With improved design of the electromagnetism, CP2814 can excavate all proficiency of the high ranked magnets.

     

    2.  CP2814 increases the Max. Current and Max. Power by at least 15% based on the same setup of C2814.  

     

    3.  CP2814 increases the efficiency by about 5%, which means longer flight time.

    CP2814/2350Kv Specification

    Kv value 2350

    Stator Thickness 28

    No. of Stator Arms 14

    No. of Magnet Poles 12

    Motor Wind 6△

    No-Load Current 2.4A@10V

    Motor Resistance (Ω) Per Phase 0.024

    Motor Resistance (Ω) Phase to Phase 0.016

    Max Continuous Current 68A

    Max Continuous Power 1100W

    Weight 100g

    Outside Diameter 35mm

    Shaft Diameter 5mm

    Body Length

    34.5mm

    Out of stock

  • Cobra Motor CP2814/7 Kv=2000 Outrunner Brushless Motor for Flying Wings

    Regular Price:

    $52.99

    Cobra Champion Series For Wings:

    Compared with C2814, there are several obvious differences in CP2814 shown below:

     

    1. As one family member of Cobra Champion series, CP2814 also uses the highest ranked magnet as other Champion FPV racing motors do.  With improved design of the electromagnetism, CP2814 can excavate all proficiency of the high ranked magnets.

     

    2.  CP2814 increases the Max. Current and Max. Power by at least 15% based on the same setup of C2814.  

     

    3.  CP2814 increases the efficiency by about 5%, which means longer flight time.

     

    CP2814/2000Kv Specification

    Kv value 2000

    Stator Thickness 28

    No. of Stator Arms 14

    No. of Magnet Poles 12

    Motor Wind 14

    No-Load Current 7△

    Motor Resistance (Ω) Per Phase 2.25A@10V

    Motor Resistance (Ω) Phase to Phase 0.02

    Max Continuous Current 64A

    Max Continuous Power 1000W

    Weight 100g

    Outside Diameter 35

    Shaft Diameter 5

    Body Length 34.5

    Out of stock

  • Cobra C-2814/7 Brushless Motor, Kv=2100

    Regular Price:

    $41.99

    Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

    The Cobra 2814 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

    Included with every Cobra 2814 Series Motor is a complete accessory package which contains the following items:

    ● Heavy Duty 3mm Thick Cross Style Motor Mount
    ● Four M3x6mm Motor Mount Screws
    ● Bolt-On style threaded prop adapter with 4 screws
    ● Retaining Collar with Set Screw
    ● Three female 3.5mm bullet connectors
    ● Three pieces of heat-shrink tubing

    Out of stock

  • Cobra C-2217/7 Brushless Motor, Kv=2500

    Regular Price:

    $30.99

    Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

    The Cobra 2217 series motors have a 1/8 inch (3.17mm) shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

    Included with every Cobra 2217 Series Motor is a complete accessory package which contains the following items:

    ● Heavy Duty 3mm Thick Cross Style Motor Mount
    ● Four M3x6mm Motor Mount Screws
    ● Bolt-On style theaded prop adapter with 3 screws
    ● Retaining Collar with Set Screw
    ● Three female 3.5mm bullet connectors
    ● Three pieces of heat-shrink tubing

    Out of stock

  • Cobra USB Programmer

    Regular Price:

    $9.99

    The Cobra USB Programmer allows users to connect their Cobra Mini FPV speed controller to a PC computer so that they can make firmware changes, or perform firmware updates. This programmer works with both the 20 amp and 30amp Mini FPV ESC's, as well as the Cobra Wing Series and High Voltage ESC's.

    Please Note: This programmer will NOT work with the Cobra Airplane Series ESC's that have a green strip on the label. For these ESC's you need to use the Cobra ESC Programming Card.(http://innov8tivedesigns.com/cobra-esc-programming-card)

    The programmer plugs directly into a USB port on any Windows PC, and is self-powered from the USB port. When used with Windows 7, 8, 8.1 and 10, the drivers for this programmer are already included in the driver database, and will automatically load when the programmer is plugged in for the first time. For older PC's running Windows 2000, XP or Vista, a driver must be installed before plugging the programmer in for the first time. A link to this unified driver can be found below.

    A Graphical User Interface (GUI) program is also required to allow the user to make changes to the existing firmware, or to load new versions of firmware. A link to this program file is also included below.

    Windows Driver Files http://innov8tivedesigns.com/docs/CH341SER_drive.zip

    Windows User Interface Program http://innov8tivedesigns.com/docs/BLHeliSuite14401.zip

    Programming Instructions for Cobra Wing Series ESC's http://innov8tivedesigns.com/docs/Wing%20ESC%20User%20Manual-June-22-2017.pdf

    Out of stock

  • Cobra 100A FPV Wing ESC with 6A Switching BEC

    Regular Price:

    $73.99

    Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect compliment to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

    The new Cobra FPV Wing Series ESC's are designed for the new FPV Racing Wings that utilize high-RPM motors. These ESC's feature the latest BL-Heli firmware that stays in sync with motors running up over 40,000 RPM.

    The 80 Amp Wing model ESC includes a built-in 5.5 volt switching BEC rated for 6 amps of current to handle the power needs of the larger digital servos.

    The input leads on the speed controller are pre-tinned, and ready to solder on the battery connector of your choice. The output leads have a set of 3.5mm female bullet connectors already soldered on.

    Out of stock

  • Cobra 80A FPV Wing ESC with 6A Switching BEC

    Regular Price:

    $63.99

    Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect compliment to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

    The new Cobra FPV Wing Series ESC's are designed for the new FPV Racing Wings that utilize high-RPM motors. These ESC's feature the latest BL-Heli firmware that stays in sync with motors running up over 40,000 RPM.

    The 80 Amp Wing model ESC includes a built-in 5.5 volt switching BEC rated for 6 amps of current to handle the power needs of the larger digital servos.

    The input leads on the speed controller are pre-tinned, and ready to solder on the battery connector of your choice. The output leads have a set of 3.5mm female bullet connectors already soldered on.

    Out of stock

  • Cobra 60A FPV Wing ESC with 6A Switching BEC

    Regular Price:

    $47.99

    Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect compliment to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

    The new Cobra FPV Wing Series ESC's are designed for the new FPV Racing Wings that utilize high-RPM motors. These ESC's feature the latest BL-Heli firmware that stays in sync with motors running up over 40,000 RPM.

    The 60 Amp Wing model ESC includes a built-in 5.5 volt switching BEC rated for 6 amps of current to handle the power needs of the larger digital servos.

    The input leads on the speed controller are pre-tinned, and ready to solder on the battery connector of your choice. The output leads have a set of 3.5mm female bullet connectors already soldered on.

    Out of stock

  • Cobra 40A FPV Wing ESC with 6A Switching BEC

    Regular Price:

    $39.99

    Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect compliment to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

    The new Cobra FPV Wing Series ESC's are designed for the new FPV Racing Wings that utilize high-RPM motors. These ESC's feature the latest BL-Heli firmware that stays in sync with motors running up over 40,000 RPM.

    The 40 Amp Wing model ESC includes a built-in 5.5 volt switching BEC rated for 6 amps of current to handle the power needs of the larger digital servos.

    The input leads on the speed controller are pre-tinned, and ready to solder on the battery connector of your choice. The output leads have a set of 3.5mm female bullet connectors already soldered on.

  • Cobra 30A FPV Wing ESC with 3A Switching BEC

    Regular Price:

    $26.99

    Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect compliment to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

    The new Cobra FPV Wing Series ESC's are designed for the new FPV Racing Wings that utilize high-RPM motors. These ESC's feature the latest BL-Heli firmware that stays in sync with motors running up over 40,000 RPM.

    The 30 Amp Wing model ESC includes a built-in 5.5 volt switching BEC rated for 3 amps of current to handle the power needs of the larger digital servos.

    The input leads on the speed controller are pre-tinned, and ready to solder on the battery connector of your choice. The output leads have a set of 3.5mm female bullet connectors already soldered on.

    Out of stock

  • Cobra C-3520/12 Brushless Motor, Kv=820

    Regular Price:

    $57.99

    Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

    The Cobra 3520 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

    Included with every Cobra 3520 Series Motor is a complete accessory package which contains the following items:

    ● Heavy Duty 3mm Thick Cross Style Motor Mount
    ● Four M3x6mm Motor Mount Screws
    ● Bolt-On style threaded prop adapter with 3 screws
    ● Retaining Collar with Set Screw
    ● Three female 3.5mm bullet connectors
    ● Three pieces of heat-shrink tubing

    Out of stock

  • Cobra C-3515/14 Brushless Motor, Kv=950

    Regular Price:

    $51.99

    Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

    The Cobra 3515 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

    Included with every Cobra 3515 Series Motor is a complete accessory package which contains the following items:

    ● Heavy Duty 3mm Thick Cross Style Motor Mount
    ● Four M3x6mm Motor Mount Screws
    ● Bolt-On style threaded prop adapter with 3 screws
    ● Retaining Collar with Set Screw
    ● Three female 3.5mm bullet connectors
    ● Three pieces of heat-shrink tubing

    Out of stock

  • Cobra C-2826-EF1 Brushless Motor, Kv=1200

    Regular Price:

    $54.99

    Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

    The Cobra 2826 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

    The Cobra C-2826-EF1 motor was developed for Electric Pylon Racing, and has been accepted as a certified motor by the EF1 Competition racing committee. The Kv value of this motor is optimized for use with an APC 8x8-E prop running on a 4-cell Li-Po battery pack, as stated in the EF1 Racing Rules. The rear shaft on this motor is cut shorter than the standard Cobra 2826 motors. There is just enough protruding to use the optional shaft retaining collar, for additional security on the motor shaft, with none extra protruding into the battery compartment of your model.

    Included with every Cobra 2826 Series Motor is a complete accessory package which contains the following items:

    ● Heavy Duty 3mm Thick Cross Style Motor Mount
    ● Four M3x6mm Motor Mount Screws
    ● Bolt-On style threaded prop adapter with 4 screws
    ● Retaining Collar with Set Screw
    ● Three female 3.5mm bullet connectors
    ● Three pieces of heat-shrink tubing

    Out of stock

  • Cobra C-2826/6 Brushless Motor, Kv=1470

    Regular Price:

    $48.99

    Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

    The Cobra 2826 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

    Included with every Cobra 2826 Series Motor is a complete accessory package which contains the following items:

    ● Heavy Duty 3mm Thick Cross Style Motor Mount
    ● Four M3x6mm Motor Mount Screws
    ● Bolt-On style threaded prop adapter with 3 screws
    ● Retaining Collar with Set Screw
    ● Three female 3.5mm bullet connectors
    ● Three pieces of heat-shrink tubing

  • Cobra C-2820/8 Brushless Motor, Kv=1450

    Regular Price:

    $42.99

    Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

    The Cobra 2820 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

    Included with every Cobra 2820 Series Motor is a complete accessory package which contains the following items:

    ● Heavy Duty 3mm Thick Cross Style Motor Mount
    ● Four M3x6mm Motor Mount Screws
    ● Bolt-On style theaded prop adapter with 4 screws
    ● Retaining Collar with Set Screw
    ● Three female 3.5mm bullet connectors
    ● Three pieces of heat-shrink tubing

    Out of stock

1 - 16 of 22

Page:
  1. 1
  2. 2