Emax

Filters
Brand
  1. Emax (34)
Number of Blades
  1. Tri-Blade (7)
  2. Quad-Blade (1)
Motor Size
  1. Micro (2)
  2. 22xx (4)
  3. 23xx (1)
Motor KV
  1. 2300kv - 2599kv (5)
  2. > 2900kv (2)
Number of ESC's
  1. Single (2)

1 - 16 of 34

Page:
  1. 1
  2. 2
  3. 3
  • EMAX RS2205 2300KV CW COOLING SERIES RACESPEC MOTOR - 4 PCS

    Regular Price:

    $39.99

    EMAX RS2205 2300KV CW COOLING SERIES RACESPEC MOTOR - 4 PCS

    Emax RS2205 Race Spec Motors

    Introducing the Emax Race Spec family of high performance brushless motors for multirotor FPV racing. Redesigned and engineered to perform better than most in it’s class, every motor is precision crafted within tight tolerances. Paired with performance driven props from any leading manufacturer will result in unreal thrust.

    Cooling:
    The unique fins machined into the bell draw up cool air from the motor base and through the coils as the motor spools up. The faster it spins, the more air it ventilates. Cooling fins significantly reduce heat soak by at least 30%. This “cool” feature allows the RS2205 to not only have a longer lasting motor, but also harness the power of N52 magnets.

    N52 Magnets:
    Uses the highest grade magnets. Better acceleration, stopping power, and sustained RPMs during high kv.

    Bearings:
    Genuine Japanese NMB Bearings provide long lasting, smooth performance.

    Thrust:
    Produces over +1,000g of thrust using 4S and GF5045BN.

    Key Features:
    1K+ Thrust with 4s battery and recommend propeller combo
    Cooling Series Bell Design reduces motor temperature by at least 30%
    Highest Grade N52 Neodymium magnets
    Genuine Japanese NMB Bearings
    Each Motor is Dynamically Balanced in the factory.
    15mm Extended Prop Shaft allows virtually any prop with 5mm hole.
    3 Lock nuts and 2 sets of motor screws for 3mm and 4mm thick frames.
    Windings made from copper of high purity

    Specifications:
    Model: RS2205
    KV: 2300kv
    Weight: Approx. 30g with wires
    Wire AWG: 20AWG
    Stator Diameter: 22mm
    Stator Height: 5mm
    Shaft Diameter: 3mm
    Configuration: 12N14P
    Motor Diameter: 27.9mm
    Motor Height: 31.7mm
    Prop Adapter Shaft Thread: M5
    Input voltage: 3S-4S (12.6 - 16.8v)
    KV2300 With HQ5045 BN Max.thrust:1024g
    KV2600 With HQ4045 BN Max.thrust:763g

     
  • EMAX RS1106 4500KV Micro Brushless Motor (1 Pcs)

    Regular Price:

    $12.99

    EMAX RS1106 4500KV Micro Brushless Motor (1 Pcs)

    Legendary RS power for micro FPV racing quadcopters available in 7500, 6000 and 4500 KV

    The new RS1106 brushless motor line sets a new standard in performance for the 2” propeller class. With 3 KV choices each optimized for 2s, 3s and even 4s batteries for insane speed in tiny package.

     

    The RS1106 has 6mm tall stator to provide the instantaneous torque that is usually lacking in high KV 1104 motors. The RS1106 is also one of the only micro brushless motors with active cooling fins integrated into the bell to keep magnets cooler so the power is consistent lap after lap.

     

    For micro builds it’s important to have as little mechanical vibration to get the best performance from your flight controller. To ensure smoothness each motor is precision CNC, uses premium ball bearings and comes factory balanced.

     

    The bell housing has two sizes of hole spacing to fit the EMAX 2345 Tri-Blade and M2 x 5mm that works with a wide range of other 2” class propellers. Two lengths of mounting screws are included for so it will fit a wide range of frame styles.

     

    RS1106 7500KV is the perfect upgrade for those stepping up from 1104 size that typically come with many 2s ready to fly builds.

     

    RS1106 6000KV is a versatile upgrade motor for 2s-3s and well suited for those wishing to spin heavier 4 blade or 5 blade propellers.

     

    RS1106 4500KV this the motor if want insane punch with efficiency when using 4s batteries. This motor can also spin lightweight 3” propellers up 3s

     

    1.Most powerful micro motors for 2” to 3” propellers
    2.RS exclusive “Cooling” design on a micro sized motor
    3. 3 KV options 4500KV, 6000KV, 7500KV
    4. Prop bolt pattern for Emax 2345 M2 x 9mm and M2 x 5mm Propellers
    5.High Quality NSK bearings for long lasting smoothness
    6. Strong N52SH Magnets
    7. Factory Balanced Precision CNC Motor Bells

  • EMAX AVAN Babyhawk 2.3 inch propeller. 2.3x2.7x3. 6 CW + 6 CCW pack - Clear Blue

    Regular Price:

    $3.99
    EMAX AVAN Babyhawk 2.3 inch propeller. 2.3x2.7x3. 6 CW + 6 CCW pack - Clear Blue

    The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of your Babyhawk while remaining efficient. A true constant 2.7" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Babyhawk weighs 1.25 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 1.14 grams*square centimeter which in turn makes a very responsive prop. The large blade chord makes the propeller very durable. Best match for the original Babyhawk or any micro running the 1104 5250kv motors with 2-3s batteries. Avan Babyhawk has screw hole mount spacing both for the original 1104 5250kv motors as well as a smaller hole spacing (5mm diameter spacing) to mount on other micro sized motors. With the new standard hole pattern try them on EMAX 1106 6000kv motors for insane thrust and speed.

    The Avan Babyhawk was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.

    A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.

    Geometry:
    2.3 inch diameter
    2.7 inch pitch
    3 blades
    fits Babyhawk motor and has hole pattern of 5mm diameter for other common motors
    Perfect Balance!

    Inertial Properties:
    weight: 1.25 grams
    Moment of Inertia: 1.14 g*cm^2

  • EMAX AVAN Babyhawk 2.3 inch propeller. 2.3x2.7x3. 6 CW + 6 CCW pack - Clear Red

    Regular Price:

    $3.99
    EMAX AVAN Babyhawk 2.3 inch propeller. 2.3x2.7x3. 6 CW + 6 CCW pack - Clear Red

    The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of your Babyhawk while remaining efficient. A true constant 2.7" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Babyhawk weighs 1.25 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 1.14 grams*square centimeter which in turn makes a very responsive prop. The large blade chord makes the propeller very durable. Best match for the original Babyhawk or any micro running the 1104 5250kv motors with 2-3s batteries. Avan Babyhawk has screw hole mount spacing both for the original 1104 5250kv motors as well as a smaller hole spacing (5mm diameter spacing) to mount on other micro sized motors. With the new standard hole pattern try them on EMAX 1106 6000kv motors for insane thrust and speed.

    The Avan Babyhawk was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.

    A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.

    Geometry:
    2.3 inch diameter
    2.7 inch pitch
    3 blades
    fits Babyhawk motor and has hole pattern of 5mm diameter for other common motors
    Perfect Balance!

    Inertial Properties:
    weight: 1.25 grams
    Moment of Inertia: 1.14 g*cm^2

  • EMAX AVAN Babyhawk 2.3 inch propeller. 2.3x2.7x3. 6 CW + 6 CCW pack - Clear

    Regular Price:

    $3.99
    EMAX AVAN Babyhawk 2.3 inch propeller. 2.3x2.7x3. 6 CW + 6 CCW pack - Clear

    The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of your Babyhawk while remaining efficient. A true constant 2.7" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Babyhawk weighs 1.25 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 1.14 grams*square centimeter which in turn makes a very responsive prop. The large blade chord makes the propeller very durable. Best match for the original Babyhawk or any micro running the 1104 5250kv motors with 2-3s batteries. Avan Babyhawk has screw hole mount spacing both for the original 1104 5250kv motors as well as a smaller hole spacing (5mm diameter spacing) to mount on other micro sized motors. With the new standard hole pattern try them on EMAX 1106 6000kv motors for insane thrust and speed.

    The Avan Babyhawk was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.

    A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.

    Geometry:
    2.3 inch diameter
    2.7 inch pitch
    3 blades
    fits Babyhawk motor and has hole pattern of 5mm diameter for other common motors
    Perfect Balance!

    Inertial Properties:
    weight: 1.25 grams
    Moment of Inertia: 1.14 g*cm^2

  • EMAX Babyhawk-R RACE(R) Edition 136mm 3inch F3 Magnum Mini 5.8G FPV Racing RC Drone 3S/4S PNP

    Regular Price: $160.00

    Special Price $145.99

    EMAX Babyhawk-R RACE(R) Edition 136mm 3inch F3 Magnum Mini 5.8G FPV Racing RC Drone 3S/4S PNP

    Introducing the Babyhawk R, made by racers for racers.
    Features:

    • -High Speed power system featuring RS1106 and the 3 inch propeller
    • -FC/ESC AIO - Mini Magnum Tower
    • -136mm Carbon Fiber Frame
    • -Only weighs 86.42g grams
    • -Customizable Shell Canopy with adjustable camera positions
    • -Pre-tuned Betaflight Firmware for optimized flight performance
    • -OSD integrated with Low-Voltage detection
    • -40 Channel 5.8g VTX switchable 25/200mw 
    • -Compatible with EMAX Transmitter/Goggles/Accessories
    • -Utilizes Micro CCD Sensor Camera
    • -Accepts 3-4 cell LiPo batteries 

    Product list

    1. BabyHawk  Race × 1  (BNF)
    2. Manual ×1
    3. 3 inch propeller propeller × 2 
    4. Screw pack×1
    5. Camera adjusting board×1
  • EMAX Babyhawk-R RACE(R) Edition 136mm 3inch F3 Magnum Mini 5.8G FPV Racing RC Drone 3S/4S BNF

    Regular Price: $170.00

    Special Price $155.99

    EMAX Babyhawk-R RACE(R) Edition 136mm 3inch F3 Magnum Mini 5.8G FPV Racing RC Drone 3S/4S BNF

    Introducing the Babyhawk R, made by racers for racers.
    Features:

    -High Speed power system featuring RS1106 and the 3 inch propeller
    -FC/ESC AIO - Mini Magnum Tower
    -136mm Carbon Fiber Frame
    -Only weighs 86.42g grams
    -Customizable Shell Canopy with adjustable camera positions
    -Pre-tuned Betaflight Firmware for optimized flight performance
    -OSD integrated with Low-Voltage detection
    -40 Channel 5.8g VTX switchable 25/200mw
    -Compatible with EMAX Transmitter/Goggles/Accessories
    -Utilizes Micro CCD Sensor Camera
    -Accepts 3-4 cell LiPo batteries
    Product list

    BabyHawk Race × 1 (BNF)
    Manual ×1
    3 inch propeller propeller × 2
    Screw pack×1
    Camera adjusting board×1

  • EMAX AVAN-­R 5" Tri-Blade Propeller - 5 set bulk (10 CW + 10 CCW) Black Frost

    Regular Price:

    $10.99

    EMAX AVAN-­R 5" Tri-Blade Propeller - 5 set bulk (10 CW + 10 CCW) Black Frost

    Selling Points:
    Blades profiles are optimized at key point along the length of the blade maximize lift coefficients.

    Linear throttle response - predictable response of propeller action throughout the entire throttle band.

    High grade poly carbonate for propeller and stiffness.

    Optimized design to match motor performance curves of the RS2306 series of brushless motors and similar performing motors in its class.

    Advance Ratio is used instead of conventional pitch theory to make the most efficient propeller in both speed and handling.

    Exclusive locking design in propeller hub to match with RS2306 and RS2205 motors to lessen prop loosening during flight.

    Countless hours of R&D were implemented on genuine AVAN propellers to take advantage of the RS2306 (and most modern 22xx and 23xx motors) full potential.

    Use of non-genuine (copied or cloned) propeller is NOT RECOMMENDED and will yield poor performance.

  • EMAX AVAN-­R 5" Tri-Blade Propeller - 5 set bulk (10 CW + 10 CCW) Purple

    Regular Price:

    $10.99
    EMAX AVAN-­R 5" Tri-Blade Propeller - 5 set bulk (10 CW + 10 CCW) Purple

    Selling Points:
    Blades profiles are optimized at key point along the length of the blade maximize lift coefficients.

    Linear throttle response - predictable response of propeller action throughout the entire throttle band.

    High grade poly carbonate for propeller and stiffness.

    Optimized design to match motor performance curves of the RS2306 series of brushless motors and similar performing motors in its class.

    Advance Ratio is used instead of conventional pitch theory to make the most efficient propeller in both speed and handling.

    Exclusive locking design in propeller hub to match with RS2306 and RS2205 motors to lessen prop loosening during flight.

    Countless hours of R&D were implemented on genuine AVAN propellers to take advantage of the RS2306 (and most modern 22xx and 23xx motors) full potential.

    Use of non-genuine (copied or cloned) propeller is NOT RECOMMENDED and will yield poor performance.

  • EMAX Formula Series 45A ESC Support BLHELI_32 2­-5S

    Regular Price:

    $16.99
    EMAX Formula Series 45A ESC Support BLHELI_32 2­-5S

    Introducing the new Formula32 ESC from EMAX, our first in a series of BLHELI32 specific ESCs. Lightweight and small in width, the Formula32 provides 45 amps of power using DSHOT1200 in order to provide you with the smoothest flight possible. Combined with F3-F7 Flight Controllers capable of 32K looping, the Formula32 will deliver efficient and controlled power to your high speed racing drone.

    SPECS:
    Brand name: EMAX
    Item name: Formula 32 45A ESC
    Input voltage: 2-5S Lipo
    BEC: NO
    Continue Current: 45A
    Burst current: 55A
    Firmware: BLHeli_32
    Weight: 2.6g (w/o wire)
    MCU STM32F051 using BLHeli_32
    DSHOT up to 1200

  • EMAX RS2205 2300KV CW RACESPEC MOTOR - COOLING SERIES

    Regular Price:

    $9.99
    EMAX RS2205 2300KV CW RACESPEC MOTOR - COOLING SERIES

    Emax RS2205 Race Spec Motors

    Introducing the Emax Race Spec family of high performance brushless motors for multirotor FPV racing. Redesigned and engineered to perform better than most in it’s class, every motor is precision crafted within tight tolerances. Paired with performance driven props from any leading manufacturer will result in unreal thrust.

    Cooling:
    The unique fins machined into the bell draw up cool air from the motor base and through the coils as the motor spools up. The faster it spins, the more air it ventilates. Cooling fins significantly reduce heat soak by at least 30%. This “cool” feature allows the RS2205 to not only have a longer lasting motor, but also harness the power of N52 magnets.

    N52 Magnets:
    Uses the highest grade magnets. Better acceleration, stopping power, and sustained RPMs during high kv.

    Bearings:
    Genuine Japanese NMB Bearings provide long lasting, smooth performance.

    Thrust:
    Produces over +1,000g of thrust using 4S and GF5045BN.

    Key Features:
    1K+ Thrust with 4s battery and recommend propeller combo
    Cooling Series Bell Design reduces motor temperature by at least 30%
    Highest Grade N52 Neodymium magnets
    Genuine Japanese NMB Bearings
    Each Motor is Dynamically Balanced in the factory.
    15mm Extended Prop Shaft allows virtually any prop with 5mm hole.
    3 Lock nuts and 2 sets of motor screws for 3mm and 4mm thick frames.
    Windings made from copper of high purity

    Specifications:
    Model: RS2205
    KV: 2300kv
    Weight: Approx. 30g with wires
    Wire AWG: 20AWG
    Stator Diameter: 22mm
    Stator Height: 5mm
    Shaft Diameter: 3mm
    Configuration: 12N14P
    Motor Diameter: 27.9mm
    Motor Height: 31.7mm
    Prop Adapter Shaft Thread: M5
    Input voltage: 3S-4S (12.6 - 16.8v)
    KV2300 With HQ5045 BN Max.thrust:1024g
    KV2600 With HQ4045 BN Max.thrust:763g

     

    Out of stock

  • EMAX RS1106 6000KV MICRO BRUSHLESS MOTOR (1 PCS)

    Regular Price:

    $12.99
    EMAX RS1106 6000KV MICRO BRUSHLESS MOTOR (1 PCS)

    Legendary RS power for micro FPV racing quadcopters available in 7500, 6000 and 4500 KV

    The new RS1106 brushless motor line sets a new standard in performance for the 2” propeller class. With 3 KV choices each optimized for 2s, 3s and even 4s batteries for insane speed in tiny package.

     

    The RS1106 has 6mm tall stator to provide the instantaneous torque that is usually lacking in high KV 1104 motors. The RS1106 is also one of the only micro brushless motors with active cooling fins integrated into the bell to keep magnets cooler so the power is consistent lap after lap.

     

    For micro builds it’s important to have as little mechanical vibration to get the best performance from your flight controller. To ensure smoothness each motor is precision CNC, uses premium ball bearings and comes factory balanced.

     

    The bell housing has two sizes of hole spacing to fit the EMAX 2345 Tri-Blade and M2 x 5mm that works with a wide range of other 2” class propellers. Two lengths of mounting screws are included for so it will fit a wide range of frame styles.

     

    RS1106 7500KV is the perfect upgrade for those stepping up from 1104 size that typically come with many 2s ready to fly builds.

     

    RS1106 6000KV is a versatile upgrade motor for 2s-3s and well suited for those wishing to spin heavier 4 blade or 5 blade propellers.

     

    RS1106 4500KV this the motor if want insane punch with efficiency when using 4s batteries. This motor can also spin lightweight 3” propellers up 3s

     

    1.Most powerful micro motors for 2” to 3” propellers
    2.RS exclusive “Cooling” design on a micro sized motor
    3. 3 KV options 4500KV, 6000KV, 7500KV
    4. Prop bolt pattern for Emax 2345 M2 x 9mm and M2 x 5mm Propellers
    5.High Quality NSK bearings for long lasting smoothness
    6. Strong N52SH Magnets
    7. Factory Balanced Precision CNC Motor Bells

  • EMAX AVAN MICRO 2 INCH PROPELLER 6 CW + 6 2X2.2X4 CCW BULK PACK

    Regular Price:

    $3.99
    EMAX AVAN MICRO 2 INCH PROPELLER 6 CW + 6 2X2.2X4 CCW BULK PACK

    The EMAX AVAN micro was designed to take your micro to the furthest limits.
    Made for high speed and ultimate control, a 2 inch quad blade prop designed to push your micros past 70 mph. Perfect match for a 11xx motor around 4500-6500kv with 2-4s lipo batteries. 
    Produced with a special blend of PC with a strong root design to be very durable.

  • EMAX BABYHAWK RACE (R) EDITION 2" FPV QUADCOPTER (BNF) (FRSKY)

    Regular Price:

    $149.99

    EMAX BABYHAWK RACE (R) EDITION FPV QUADCOPTER (BNF) (FRSKY)

    INSTRUCTION MANUAL: https://www.emaxmodel.com/download/Babyhawk_R_Manual.pdf

    SERVICE BULLETIN RE: EMAX BABY HAWK R: http://emax-usa.com/news/service-bulletin-re-emax-baby-hawk-r/

    BNF includes D8 compatible Frsky receiver.

    Introducing the Babyhawk R, made by racers for racers.
    Features:
    -High Speed power system featuring RS1106 and the Avan Micro
    -FC/ESC AIO - Mini Magnum Tower
    -112mm Carbon Fiber Frame
    -Only weighs 82.8 grams
    -Customizable Shell Canopy with adjustable camera positions
    -Pre-tuned Betaflight Firmware for optimized flight performance
    -OSD integrated with Low-Voltage detection
    -40 Channel 5.8g VTX switchable 25/200mw
    -Compatible with EMAX Transmitter/Goggles/Accessories
    -Utilizes Micro CCD Sensor Camera
    -Accepts 3-4 cell LiPo batteries

  • EMAX BABYHAWK RACE Edition 2" FPV Quadcopter (PNP)

    Regular Price:

    $139.99
    EMAX BABYHAWK RACE Edition FPV Quadcopter (PNP)

    Introducing the Babyhawk R, made by racers for racers.
    Features:
    -High Speed power system featuring RS1106 and the Avan Micro
    -FC/ESC AIO - Mini Magnum Tower
    -112mm Carbon Fiber Frame
    -Only weighs 82.5 grams
    -Customizable Shell Canopy with adjustable camera positions
    -Pre-tuned Betaflight Firmware for optimized flight performance
    -OSD integrated with Low-Voltage detection
    -40 Channel 5.8g VTX switchable 25/200mw
    -Compatible with EMAX Transmitter/Goggles/Accessories
    -Utilizes Micro CCD Sensor Camera
    -Accepts 3-4 cell LiPo batteries

    Babyhawk Race Key Features

    FRAME
    -Light weight carbon fiber frame with impact resistant plastic canopy available in several colors
    -Strong 3mm arms with lower profile arms to reduce drag.
    -Integrated flight controller vibration dampening system for a smoother and more locked in feeling flights

    POWER SYSTEM
    -Powered by the new Magnum Mini tower system with F3 FC + 4 in 1 12A BLHELI S ESC 3-4s
    -Betaflight Firmware 3.2.X with comes pre tuned at the factory for optimized flight performance
    -Class leading Emax RS1106 6000kv brushless motors paired with the new Avan 2” quad blade propeller for maximum speed and control.

    FPV SYSTEM
    -650TVL Micro CCD camera with tuned profiles for different light condition. CCD is preferred by more pilots over CMOS for its better handling of high contrast lighting and resistance to “jello” in your flight video.
    - Canopy has adjustable camera positions so pilot can tune for track speed and size.
    - 40 Channel 5.8g VTX with LED info display and switchable transmission power from 25/200mw

  • EMAX Bullet Pro Edition 35A 3-6S BLheli_S Dshot FPV ESC (LED Control)

    Regular Price:

    $15.99
    EMAX Bullet Pro Edition 35A 3-6S BLheli_S Dshot FPV ESC (LED Control)

1 - 16 of 34

Page:
  1. 1
  2. 2
  3. 3