FuriousFPV

Filters
Brand
  1. FuriousFPV (113)
Number of Blades
  1. Quad-Blade (5)
Antenna Type
  1. Omni (15)
Antenna Polarization
  1. Right Hand (11)
  2. Left Hand (6)
  3. Linear (1)
Motor Size
  1. Micro (1)
Motor KV
  1. > 2900kv (1)

1 - 16 of 113

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • FuriousFPV True-D V3/V3.5 Transparent Cover (FatShark Attitude V3/V4)

    Regular Price:

    $4.95
    FuriousFPV True-D V3/V3.5 Transparent Cover (FatShark Attitude V3/V4)

    * This is spare plastic injection door cover for FuriousFPV TRUE-D V3 and V3.5 Door cover. Not compatible with True-D V1 and V2

    Features:

    - Ergonomic new plastic injection cover

    - Better protection mechanic to protect the OLED screen in transportation

    - New locking system between True-D boards and cover to prevent short circuit

    - USB plug-in without removing the plastic cover

    -Designed for perfect fit with FatShark Goggles Attitude V3 + V4

    Color: Transparent

  • FuriousFPV Antenna Cover - Red (RHCP)

    Regular Price:

    $2.95

    The new cover for Stubby antenna is designed to protect the Stubby antennas from deform or damage during crashes. It is designed carefully by CAD system to cut all weights yet strong enough to protect the antennas in crashes. We have tested this cover in numerous crash incidents and the antennas are perfectly well protected. With plastic injection technology and extreme light weight (1.9g) engineering plastic material, we have achieved the balance of strength and weight for the Stubby antenna

  • FuriousFPV Antenna Cover - Red (LHCP)

    Regular Price:

    $2.95

    The new cover for Stubby antenna is designed to protect the Stubby antennas from deform or damage during crashes. It is designed carefully by CAD system to cut all weights yet strong enough to protect the antennas in crashes. We have tested this cover in numerous crash incidents and the antennas are perfectly well protected. With plastic injection technology and extreme light weight (1.9g) engineering plastic material, we have achieved the balance of strength and weight for the Stubby antenna

  • FuriousFPV Antenna Cover - Black (LHCP)

    Regular Price:

    $2.95

    The new cover for Stubby antenna is designed to protect the Stubby antennas from deform or damage during crashes. It is designed carefully by CAD system to cut all weights yet strong enough to protect the antennas in crashes. We have tested this cover in numerous crash incidents and the antennas are perfectly well protected. With plastic injection technology and extreme light weight (1.9g) engineering plastic material, we have achieved the balance of strength and weight for the Stubby antenna

  • FuriousFPV RageProp 5042-4 Race Edition Propeller (2CW - 2CCW) - Orange

    Regular Price:

    $3.95
    FuriousFPV RageProp 5042-4 Race Edition Propeller (2CW - 2CCW) - Orange
  • FuriousFPV Module Bluetooth for VTX-RACE

    Regular Price:

    $12.95

    Functionality is the game and simplicity is the key!

    The Bluetooth module is specially designed for the Stealth Race VTx, the Furious team has been hard at work, incorporating intuitive setup capability via Bluetooth technology. This brilliant system offers a dedicated Furious FPV app for iOS & Android, allowing users to adjust channels & other functionality with ease via ultra-simplified smart phone setup. It just doesn't get much simpler than that.

    Sneak Peek: More compatible devices are being developed!

    *Manual Stealth Race VTX: http://furiousfpv.com/document/Manual_Furious_/Stealth_Race_Version_final.pdf

    *Link Combo Stealth Race VTX with Bluetooth module: http://furiousfpv.com/product_info.php?products_id=512

  • FuriousFPV Flight Controller CNC Dampening Set M3 - PURPLE

    Regular Price:

    $3.95

    FuriousFPV Flight Controller CNC Dampening Set M3 - PURPLE

    Style up your Flight Controllers

    The new silicone dampening system is designed to soft mount the flight controllers. These have shown improvement in black box readings and anti-vibration for the flight controllers.

    Softmount system has never been so stylist with our new CNC aluminum screw set with multiple color anodizing.

    Features:

    Better elasticity and anti-vibration silicone material, more stable during flight.

    No more melted rubber damper from soldering

    Professional and stylish CNC Screws

    Specifically designed for FORTINI OSD Flight Controllers

    Compatible with any M3 mounting hole Flight Controllers

    Available in 4 different metal anodizing colors

    Out of stock

  • FuriousFPV Flight Controller CNC Dampening Set M3 - BLUE

    Regular Price:

    $3.95

    FuriousFPV Flight Controller CNC Dampening Set M3 - BLUE

    Style up your Flight Controllers

    The new silicone dampening system is designed to soft mount the flight controllers. These have shown improvement in black box readings and anti-vibration for the flight controllers.

    Softmount system has never been so stylist with our new CNC aluminum screw set with multiple color anodizing.

    Features:

    Better elasticity and anti-vibration silicone material, more stable during flight.

    No more melted rubber damper from soldering

    Professional and stylish CNC Screws

    Specifically designed for FORTINI OSD Flight Controllers

    Compatible with any M3 mounting hole Flight Controllers

    Available in 4 different metal anodizing colors

  • FuriousFPV Flight Controller CNC Dampening Set M3 - BLACK

    Regular Price:

    $3.95

    FuriousFPV Flight Controller CNC Dampening Set M3 - BLACK

    Style up your Flight Controllers

    The new silicone dampening system is designed to soft mount the flight controllers. These have shown improvement in black box readings and anti-vibration for the flight controllers.

    Softmount system has never been so stylist with our new CNC aluminum screw set with multiple color anodizing.

    Features:

    Better elasticity and anti-vibration silicone material, more stable during flight.

    No more melted rubber damper from soldering

    Professional and stylish CNC Screws

    Specifically designed for FORTINI OSD Flight Controllers

    Compatible with any M3 mounting hole Flight Controllers

    Available in 4 different metal anodizing colors

    Out of stock

  • FuriousFPV Flight Controller CNC Dampening Set M3 - RED

    Regular Price:

    $3.95
    FuriousFPV Flight Controller CNC Dampening Set M3 - RED

    Style up your Flight Controllers

    The new silicone dampening system is designed to soft mount the flight controllers. These have shown improvement in black box readings and anti-vibration for the flight controllers.

    Softmount system has never been so stylist with our new CNC aluminum screw set with multiple color anodizing.

    Features:

    Better elasticity and anti-vibration silicone material, more stable during flight.

    No more melted rubber damper from soldering

    Professional and stylish CNC Screws

    Specifically designed for FORTINI OSD Flight Controllers

    Compatible with any M3 mounting hole Flight Controllers

    Available in 4 different metal anodizing colors

    Out of stock

  • FuriousFPV RageProp 5042-4 Race Edition Propeller (2CW - 2CCW) - Purple FPV-0290-S

    Regular Price:

    $3.95
    FuriousFPV RageProp 5042-4 Race Edition Propeller (2CW - 2CCW) - Purple FPV-0290-S

    Out of stock

  • FuriousFPV RageProp 3054-4 Race Edition Propeller (2CW - 2CCW) - Turquoise FPV-0297-S

    Regular Price:

    $3.45

    FuriousFPV RageProp 3054-4 Race Edition Propeller (2CW - 2CCW) - Turquoise FPV-0297-S

    Rage propellers are designed from the ground specifically for multirotors. Rage propellers are designed to give you maximum control and responsiveness up at speed. Custom Computational Dynamics Software(CFD) was developed to design these propellers. This CFD uses a Vortex Lattice Method to build up the aerodynamics around a propeller. With the known flow field an optimized design is chosen by creating a perfect helical wake airflow; also known as the Betz condition. This results in a blade geometry efficient at a specified design point (speed, thrust, power, flight angle). This blade geometry often takes on a very steep angle near the hub and shallows out as we move out on the blade. Wing tips are added to the end of the blade geometry to improve efficiency by increasing the effective span of the blade while staying constrained to a specified diameter.

    This propeller of the Rage series is the 3x54x4. This is a 3 inch diameter with 4 blades designed to operate at an advance ratio of 0.54. Advance ratio is the ratio of the speed of the multirotor to the tip speed. The propeller has a static pitch of 2.9 inches at 75% radius. Designed to operate efficiently at 50 mph around 60%-70%throttle with a 1407 3600kv - 4100kv motor. Four blades was chosen to lower the moment of inertia of this propeller. This results in the propeller requiring less torque to change speed rapidly; resulting in a more precise and responsive multirotor.

    Specifications:

    - Size: 3in
    - Type: 4blade
    - Pitch: 2.9in
    - Advance ratio: 0.54
    - Quantity: 2CW & 2CCW

  • FuriousFPV RageProp 3054-4 Race Edition Propeller (2CW - 2CCW) - Pink FPV-0289-S

    Regular Price:

    $3.45

    FuriousFPV RageProp 3054-4 Race Edition Propeller (2CW - 2CCW) - Pink FPV-0289-S

    Rage propellers are designed from the ground specifically for multirotors. Rage propellers are designed to give you maximum control and responsiveness up at speed. Custom Computational Dynamics Software(CFD) was developed to design these propellers. This CFD uses a Vortex Lattice Method to build up the aerodynamics around a propeller. With the known flow field an optimized design is chosen by creating a perfect helical wake airflow; also known as the Betz condition. This results in a blade geometry efficient at a specified design point (speed, thrust, power, flight angle). This blade geometry often takes on a very steep angle near the hub and shallows out as we move out on the blade. Wing tips are added to the end of the blade geometry to improve efficiency by increasing the effective span of the blade while staying constrained to a specified diameter.

    This propeller of the Rage series is the 3x54x4. This is a 3 inch diameter with 4 blades designed to operate at an advance ratio of 0.54. Advance ratio is the ratio of the speed of the multirotor to the tip speed. The propeller has a static pitch of 2.9 inches at 75% radius. Designed to operate efficiently at 50 mph around 60%-70%throttle with a 1407 3600kv - 4100kv motor. Four blades was chosen to lower the moment of inertia of this propeller. This results in the propeller requiring less torque to change speed rapidly; resulting in a more precise and responsive multirotor.

    Specifications:

    - Size: 3in
    - Type: 4blade
    - Pitch: 2.9in
    - Advance ratio: 0.54
    - Quantity: 2CW & 2CCW

  • FuriousFPV RageProp 3054-4 Race Edition Propeller (2CW - 2CCW) - Purple FPV-0288-S

    Regular Price:

    $3.45
    FuriousFPV RageProp 3054-4 Race Edition Propeller (2CW - 2CCW) - Purple FPV-0288-S

    Rage propellers are designed from the ground specifically for multirotors. Rage propellers are designed to give you maximum control and responsiveness up at speed. Custom Computational Dynamics Software(CFD) was developed to design these propellers. This CFD uses a Vortex Lattice Method to build up the aerodynamics around a propeller. With the known flow field an optimized design is chosen by creating a perfect helical wake airflow; also known as the Betz condition. This results in a blade geometry efficient at a specified design point (speed, thrust, power, flight angle). This blade geometry often takes on a very steep angle near the hub and shallows out as we move out on the blade. Wing tips are added to the end of the blade geometry to improve efficiency by increasing the effective span of the blade while staying constrained to a specified diameter.

    This propeller of the Rage series is the 3x54x4. This is a 3 inch diameter with 4 blades designed to operate at an advance ratio of 0.54. Advance ratio is the ratio of the speed of the multirotor to the tip speed. The propeller has a static pitch of 2.9 inches at 75% radius. Designed to operate efficiently at 50 mph around 60%-70%throttle with a 1407 3600kv - 4100kv motor. Four blades was chosen to lower the moment of inertia of this propeller. This results in the propeller requiring less torque to change speed rapidly; resulting in a more precise and responsive multirotor.

    Specifications:

    - Size: 3in
    - Type: 4blade
    - Pitch: 2.9in
    - Advance ratio: 0.54
    - Quantity: 2CW & 2CCW

  • FuriousFPV FleekProp 2036-4 Propellers (2CW - 2CCW) - Turquoise FPV-0295-S

    Regular Price:

    $2.99

    FuriousFPV FleekProp 2036-4 Propellers (2CW - 2CCW) - Turquoise FPV-0295-S

    Looking for a high performance 4 bladed prop solution for your micro quad? Look no further than the FleetProp 2in propeller set - absolutely perfect for micro quad precision & performance.

    Light, strong and well balanced, FleekProp provides awesome performance at an affordable price. And when it comes to consistent levels of in flight performance, FleepProp has you covered with prop sets that perform back to back, without issue.

    Applicable for 1104, 1102, 1103 motors with motor shaft of 1.5mm in diameter, be sure to grab a set of FleekProp propellers - the best for your micro fpv frames

    Quantity: 4pcs (2CW and 2CCW)
    Size: 2inch

  • FuriousFPV FleekProp 2036-4 Propellers (2CW - 2CCW) - Red FPV-0282-S

    Regular Price:

    $2.99
    FuriousFPV FleekProp 2036-4 Propellers (2CW - 2CCW) - Red FPV-0282-S

    Looking for a high performance 4 bladed prop solution for your micro quad? Look no further than the FleetProp 2in propeller set - absolutely perfect for micro quad precision & performance.

    Light, strong and well balanced, FleekProp provides awesome performance at an affordable price. And when it comes to consistent levels of in flight performance, FleepProp has you covered with prop sets that perform back to back, without issue.

    Applicable for 1104, 1102, 1103 motors with motor shaft of 1.5mm in diameter, be sure to grab a set of FleekProp propellers - the best for your micro fpv frames

    Quantity: 4pcs (2CW and 2CCW)
    Size: 2inch

1 - 16 of 113

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5