RaceFlight

Filters
Brand
  1. RaceFlight (5)
Number of ESC's
  1. Single (1)
  2. 4-in-1 (2)

5 Item(s)

  • RaceFlight “RaceBee” Dshot Ready 30A BlHeli_S ESC

    Regular Price: $14.99

    Special Price $9.99

    RaceFlight “RaceBee” Dshot Ready 30A BlHeli_S ESC

    The RaceFlight “RaceBee” electronic speed controllers are D Shot ready! Running the latest BlHeli_S firmware, these ESCS are capable of D shot and Multishot, giving you the fast response times you need on the track or in the air.

    These come bare. Wiring kit purchased separately.

    30 amp continuous, 40 amp burst.

    Dshot ready.

    Supports Mulitshot and Oneshot.

    2.8g weight.

    15mm x 30mm

  • RaceFlight Spark 60A 2-4S BlHeli_S D-Shot ready 4in1 ESC

    Regular Price: $65.00

    Special Price $39.99

    RaceFlight Spark 60A 2-4S BlHeli_S D-Shot ready 4in1 ESC

    The RaceFlight Spark 4n1 electronic speed controller (ESC) provides the power of BlHeli_S performance in a tiny package. This makes your electronic stack small, and generally eliminates the need for an additional PDB. The Spark 4n1 ESC performs great, helps clean up any build, and is perfect for your 3″ build.

    Four ESCs Built Into One

    The RaceFlight Spark 4n1 electronic speed controller (ESC) provides the power of BlHeli_S performance in a tiny package. This makes your electronic stack small, and eliminates the need for an additional PDB. The Spark 4n1 ESC performs great, helps clean up any build, and is perfect for your 3″ build.

    Specifications

    weight: 7.1 grams
    20 mm x 20 mm mounting hole spacing
    60A continuous (15A per motor) and 80A burst (20A per motor)
    BlHeli_S
    5V voltage regulator capable of 3A continuous output
    D-Shot ready
    2s – 4s compatible
    Pins to Millivolt Flight controller
    Voltage sent to flight controller
    Easy Install
    High quality components

  • RaceFlight Bolt V2 30A 4-6S BlHeli_S D-Shot ready 4in1 ESC

    Regular Price:

    $65.00

    Four ESCs Built Into One

    The RaceFlight Bolt 4in1 electronic speed controller (ESC) was designed for power and performance. Coupled with the Revolt FC the Bolt makes a thin stack while keeping the escs save inside the frame, protected from prop strikes. The escs are also safe from vibrations thanks to the integrated RaceFlight Gummies.

    The RaceFlight 4in1 is also extremely easy to install. It is compatible with 4s through 6s batteries and has a built-in current sensor that hooks up directly to the Revolt to provide amp draw and mAh consumed information. The Bolt can pin into the revolt and provides the Revolt power.

    Specifications

    30.5mm x 30.5mm mounting hole spacing
    Integrated RaceFlight Gummies
    30 amp continuous draw per motor
    40 amp burst
    BlHeli_S
    5V voltage regulator capable of 3A continuous output
    D-Shot ready
    4s – 6s compatible
    Built in Current Sensor
    Special low noise connector integrated with the Revolt and Bolt pair
    Current and Voltage sent to flight controller
    Easy Install
    High-quality components
    Weight: 15.5 grams

    Out of stock

  • RaceFlight Millivolt F405 V2 MPU FC Flight Controller

    Regular Price: $34.99

    Special Price $24.99

    RaceFlight Millivolt F405 V2 MPU FC Flight Controller

    Millivolt

    The RaceFlight Millivolt Micro flight controller is the most advanced, performance driven, flight controller ever designed. The Millivolt uses a powerful F405 MPU, accompanied with the High Speed Invensense 20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.

    Features

    weight: 3.3 grams
    Integrated Vibration Dampening RaceFlight Gummies
    Inverter for Taranis and Futaba radios
    3.3v or 5.0v for Spektrum, Taranis, etc
    LED Driver for WS2812b programmable LED
    High Speed 32khz gyro, lowest noise floor and highest sensitivity gyro ever used
    Through hole solder pads – forms an I-Beam when soldered for extra strength
    FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
    Integrated buzzer driver
    Voltage and current ADC pins, for full voltage and current monitoring
    Full telemetry output support
    ESC flashing and configuration built into configurator
    Most active software development
    3.3v and 5v voltage outputs
    2 serial uarts
    Bluetooth expandable
    F4 processor
    16mb of flash memory
    GPS expandable
    Pins into The RaceFlight Spark Micro 4in1 ESC
    Dimensions: 25mm x 25mm
    Mounting holes: 20mm squared to center of holes

  • RaceFlight Revolt Flight Controller V3

    Regular Price: $41.99

    Special Price $31.99

    5 1

    RaceFlight Revolt Flight Controller V3

    The RaceFlight Revolt flight controller is the most advanced, performance driven, flight controller ever designed. The Millivolt uses a powerful F405 MPU, accompanied with the High Speed Invensense 20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.

    Features

    LED Driver for WS2812b programmable LED
    SBUS Inversion
    High Speed 32khz gyro, lowest noise floor and highest sensitivity gyro ever used
    Through hole solder pads – forms an I-Beam when soldered for extra strength
    FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
    Integrated buzzer driver
    Voltage and current ADC pins, for full voltage and current monitoring
    Full telemetry output support
    ESC flashing and configuration built into configurator
    Most active software development
    Selectable 3.3 voltage
    3 serial uarts
    Bluetooth expandable
    F4 processor
    16mb of flash memory
    GPS expandable
    Pins into RaceFlight Bolt 4in1 ESC
    Dimensions: 36mm x 36mm
    Mounting holes: 30.5mm squared to center of holes
    Weight: 6 grams
    Easily connectable to the RaceFlight Bolt with our special connector.

5 Item(s)