Shendrones 3" HEDWIG 145mm True X Frame (BLUE) - 3D TPU, Carbon
Hedwig is a 145mm true X 3" frame with a 2.5mm bottom plate and a 1.6mm top plate. The front and rear are 3d printed TPU, with 15mm of stack height. Hedwig is made specifically for the Furious Pico BLX FC, and will not fit a standard 36x36 fc. It's also specifically designed for this 500 mah battery, and this camera (wide angle version). AUW with battery is easily under 250 g.
Frame weight 34g.
Read more about it here: http://www.shendrones.com/hedwig
Out of stock
Regular Price: $110.00
Special Price $91.00
Shendrones MIFUNE 220mm Clamshell Aero Frame - 3D Nylon Top, Carbon Bottom
Mifune is a 220mm aero frame with a clamshell construction consisting of a 3d printed nylon top and a 3mm carbon bottom. The two pieces bolt together to lend rigidity and strength to the whole.
A 90 degree SMA VTX is recommended, and an FPV cam with a 2.1 or 2.5 lens with a 17mm barrel, 27mm from end of lens to mounting hole works best. 2.8 lenses will work with an adapter.
Frame weight 120g.
Read all about it here: http://www.shendrones.com/mifune
Out of stock
Yet another great design from Master Shen!!
This is Andy's take on a the classic Tiny Whoop frame, the Goldberg! A great write up on his design process and testing for it can be found here http://www.shendrones.com/goldberg
The frame is printed in Taulman Nylon which includes the attached AIO battery mount, motor protectors and frame stiffener.
The frame also has a built in camera mount that the camera snaps in to. It is recommended to put a dab of hot glue on the bottom of the lens to keep the camera from rotating.
Frame weight with camera mount, battery mount, motor protectors and frame stiffener is 6.4 grams.
*****The frame also includes 3 optional TPU nuts that snap over the back and side pegs to help secure the FC. (Not intended for the front peg)
***** Designed for 6mm motors
*****You will need to select whether you have stock or aftermarket FC. The motor mount vanes are reversed with the stock Inductrix FC
Krieger fell into a vat of toxic waste and out emerged Kriegerpus. Sporting the same pod as Krieger but with two more arms, Kpus is a screamer that loves to carve fast sweeping lines in the sky. Kpus is perfectly symmetrical and almost as small as possible for each prop size. Available for 4" or 5" props.