TBS Vendetta

Filters
Brand
  1. Gensace&Tattu (14)
  2. Team BlackSheep (21)
Motor Size
  1. 22xx (1)
Motor KV
  1. < 1700kv (1)

1 - 16 of 35

Page:
  1. 1
  2. 2
  3. 3
  • Team BlackSheep TBS TS100 (B2) XT60 to DC Cable

    Regular Price:

    $4.95
    Team BlackSheep TBS TS100 (B2) XT60 to DC Cable
  • Team BlackSheep TBS Vendetta V1/V2 7" Arm without motor

    Regular Price:

    $16.95

    For those who want to experiment with longer flight times or want to turn the Vendetta into a stable, portable filming speedster ;)

    Long 7" Arms to be used with the TBS Endurance motors on the TBS Vendetta for longer (7 min) flights.

    When using the TBS Endurance motors for optimal performance and battery life, please use DIRECT DRIVE 7X4.5" PROPELLER (GREEN)

    INCLUDES
    1x 7" Carbon fiber arm
    4x Sticker (2pcs Left, 2pcs Right)

  • Team BlackSheep TBS Vendetta V1 to BST cable

    Regular Price:

    $1.99

    Team BlackSheep TBS Vendetta to BST replacement cable

  • Team BlackSheep TBS Vendetta Large/GoPro Strap-20*295mm

    Regular Price:

    $4.95
    Team BlackSheep TBS Vendetta Large/GoPro Strap-20*295mm

    Large fuzzy straps included with every TBS Vendetta. For securing the GoPro to the Vendetta frame.

    20*295mm

  • Team BlackSheep TBS Vendetta II FPV Racer

    Regular Price:

    $499.99

    Full carbon fiber monocoque, quick swap arms, solder-free repairs, ready to fly as 240 size fpv racer, for 5" props. But it doesn't stop there! Sporting the brand new TBS Triumph Antenna in combination with the TBS FPVision OSD and TBS Unify Pro VTX, the TBS Vendetta allows you to configure every parameter of your FPV racer via R/C stick commands! Each drone comes tuned and test-flown by our professional tuning expert, Magnus. Install a receiver, strap on a 4S battery and the TBS VENDETTA II will tear a hole into the sky, and you're coming along for the ride!

    VERSION 2: LIGHTER, FASTER!

    CARBON FIBER ALL THE WAY

    TIGHT INTEGRATION, MODULAR DESIGN

    FROM BOX TO AIR: 5 MINUTES

    BUILT TO GROW

    FEATURES

    240-sized RTF FPV Racer
    Quick-replace 3.5mm carbon fiber arms, MT30 connectors
    Cobra Champion CP2205/2300kV Motors, HQ 5x4x3 V1S Polycarbonate props
    TBS PowerCube with fastest F3 board available, 2-6S capable Bulletproof BLHeli-S 30/50A ESCs
    Compatible with PPM, SBUS, XBUS, Spektrum R/C systems
    Fully configurable via OSD, no PC required
    GoPro 3/4 and Mobius / Runcam mount included, both 10 and 30 degree variations
    Lost model alarm
    380g weight without Battery or HD camera

    Out of stock

  • Team BlackSheep TBS POWERCUBE ELITE BUNDLE - FPVision, Ext. ESC Board, Colibri Race 2.0

    Regular Price:

    $129.95
    5 1

    The most powerful, reliable, and feature-filled two-layer racing combo on the market. Contains a PowerCube FPVision, an ESC Extension board, and a Colibri Race V2.0 . You'll wonder what to do with all the extra room!

    Add a set of 4 ZMX X25 Fusion 2206-2300kv motors and TBS BulletProof 25A BLHeli-S ESCs to make even your mortal enemies jealous.

    PACKAGE CONTENTS:

    TBS PowerCube FPVision
    TBS PowerCube External ESC Board
    TBS PowerCube Colibri Race 2.0

    Out of stock

  • Team BlackSheep TBS ENDURANCE 2206 1450kV Motor (1pc)

    Regular Price:

    $24.95

    Finding new frontiers! The TBS Miniquad ENDURANCE motor line, made for long range flying with miniquads. Ideal for 4S/7" props or 6S/6" props.

    Re-discover FPV as you've never seen it before. From the Long Range pioneers here at TBS, we've engineered this motor to carry your miniquad for an extended amount of time. Using either 4S/7" props or 6S/6" props, these motors will lift your quads into the sky for about twice to 3x the duration that you're used to flying with miniquads. This enables trips of 3-5km with return at a time, opening up huge exploration opportunities!

    These motors are built for the 7" Endurance Upgrade of the TBS Vendetta, and upcoming endurance frames by TBS. Paired with at least 1800mAh 4S, preferrably more (e.g. 2200 - 3300mAh 4S) you can expect flight times of 12-20mins of casual flying. You can also use it with 6" propellers on 6S. 

    Contains:

    • 1x Endurance Motor
    • 1x Prop Nut
    • 4x 3*6.5 screws
    • 3x 2mm Bullet connectors(Male)

    Specification:

    • Weight: 28g
    • Stator size: 2206
    • kV rating: 1450
    • Thrust: ~1.1kg with HQ 7x4.5/4S
    • Hypetrain components: all of them
    • Sexy windings: yes
  • Team BlackSheep TBS Powercube External Diagonal ESC Board

    Regular Price:

    $5.95
    Team BlackSheep TBS Powercube External Diagonal ESC Board

    TBS Powercube External ESC board to allow customized setups with your own ESCs.

    You will need a TBS Powercube Colibri Race(FC) and the TBS Powercube PDB for a complete cube or swap out the ESCs on you powercube.

    CONTAINS:
    1x TBS Powercube ESC Board (Diagonal)

  • Team BlackSheep TBS Vendetta Small/Gimbal Strap (3pc)-15*215mm

    Regular Price:

    $2.95
    Team BlackSheep TBS Vendetta Small/Gimbal Strap (3pc)-15*215mm

    Small fuzzy straps included with every TBS Vendetta and Discovery PRO gimbal frame. Secures the EVA mounts to the Vendetta frame and the GoPro cameras to the Discovery PRO gimbal.

    15*215mm

    Includes 3 straps.

  • Team BlackSheep TBS VENDETTA MT30 ADAPTER (4 SETS)

    Regular Price:

    $3.99

    Team BlackSheep TBS VENDETTA MT30 ADAPTER (4 SETS)

    4 Sets of MT30 connectors for when you decide to try experimenting with different motors.

    INCLUDES

    • 4x Male MT30 connector
    • 4x Female MT30 connector

    *The connector pins can be rotated with a pair of pliers to achieve the "directional" solder effect for motor mounting.

  • CLOSEOUT TEAM BLACKSHEEP FPV RACER TBS VENDETTA BODY

    Regular Price:

    $50.00

    INCLUDES

    TBS Vendetta Carbon Fiber Monocoque

    LED Cover (installed)

    2pc Battery Anti-Slip Pad (Installed)

  • TEAM BLACKSHEEP FPV RACER VENDETTA SPARE COBRA CM2204/2300KV (WITH MT30)

    Regular Price:

    $15.99
    TEAM BLACKSHEEP FPV RACER VENDETTA SPARE COBRA CM2204/2300KV (WITH MT30) Spare motor with MT30 connector preinstalled ready for replacement. INCLUDES 1x COBRA CM2204/2300KV (With MT30 connector) 2x Arm Sticker (1x left, 1x right)
  • TEAM BLACKSHEEP FPV RACER VENDETTA ARM WITHOUT MOTOR (1 PCS)

    Regular Price: $12.95

    Special Price $10.00

    TEAM BLACKSHEEP FPV RACER VENDETTA ARM WITHOUT MOTOR (1 PCS) One carbon fiber arm, for those wanting to experiment with different motors. INCLUDES 1x Carbon fiber arm 2x Sticker (1pcs Left, 1pcs Right)
  • TEAM BLACKSHEEP FPV RACER VENDETTA LED COVER

    Regular Price:

    $1.95
    TEAM BLACKSHEEP FPV RACER VENDETTA LED COVER One spare LED cover for the TBS Vendetta body rear.
  • TEAM BLACKSHEEP FPV RACER VENDETTA ELECTRONICS TRAY SET

    Regular Price:

    $6.95
    TEAM BLACKSHEEP FPV RACER VENDETTA ELECTRONICS TRAY SET A spare electronic mount for holding the TBS Vendetta's electronics Built to carry the TBS Powercube, CORE PNP PRO and TBS Unify PRO. INCLUDES 1x Electronic mount 4x Powercube edge guards 1x Buzzer holder
  • TEAM BLACKSHEEP FPV RACER VENDETTA BOTTOM SKID SET

    Regular Price:

    $6.95
    TEAM BLACKSHEEP TBS VENDETTA BOTTOM SKID SET For the grinders, sliders, and low-altitude afficionado-wannabe's! Spare bottom bumpers/covers. INCLUDES 5x Center bumper/cover 10x Arms motor bumper/cover

1 - 16 of 35

Page:
  1. 1
  2. 2
  3. 3