Phoenix Flight Gear Blade 180 CFX Adjustabl
Phoenix Flight Gear Blade 180 CFX Adjustable CG
Carbon Fiber Frame Plates (set of 2)
**Electronics and Helicopter components DO NOT come with the frame plates**
This frame upgrade for your Blade 180CFX is thicker and stronger than the stock frame plates while retaining the same weight. We also opened up access to the FBL unit for easier access to the servo connections. The battery has been shifted back slightly, moving the CG back allowing a larger than stock battery, the Thunderpower 3S 730mah G8. Shifting the battery also allows for easy installation of the canopy.
This is the easiest frame swap to date, just remove all of the screws on one side at a time, swap the frame plate and, re-install the screws. Repeat for the other side and confirm that your gear mesh is correct.
Weight: 4.3g each side
Stock thickness: .95mm
PFG thickness: 1.1mm
Approximate time for swap: 20 min.
Tool required: 1.5mm hex driver
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
e CG Carbon Fiber Frame Plates (set of 2) BLADE-180CFXSB