PyroDrone Hyperlite Floss F3LX True-X Racing 5" Frame

$44.99

The Hyperlite Floss 3.0 one of the most races winning frame went on diet with the release of the Floss 3.0 Lite.
Pilots loved the Floss 3.0 Lite frame but due to high demand of a True-X version from racers we are happy to introduce the Hyperlite F3LX

Fetaures:
5mm Stubbier more durable arms compared to previous version
Soft edge 5mm carbon arms to achieve goals of chamfering without loss of strenght
7075 Grade anodized aluminum core
Machined channels in the aluminum plate to prevent arm wiggle
Threaded stack screw holes (no need for nuts on the top side to prevent unnecessary hight between plate and ESC)
59 Grams incluing hardware
Protective variable angle TPU FPV camera mount (30~60 degrees)
Compatible with Nano FPV cameras ONLY
Compatible with 20*20mm stacks ONLY
Arms can be easily removed with only 2 screws
Countersunk bottom plate screws (recessed below battery pad and flat with the carbon plate)

Kit Contents:
5 x Carbon Fiber 5mm F3LX 5" arms
1 x 2mm Carbon Fiber Bottom Plate
1 x 7075 Anodized Aluminum Main Plate
1 x 2mm Carbon Fiber Top Plate
1 x Hardware Pack
1 x TPU Printed FPV Camera Mount
1 x TPU Printed Flipstick Mount with Carbon Rod & Plastic Cap
1 x Hyperlite Battery Strap

OR
  • DESCRIPTION
  • REVIEWS
  • The Hyperlite Floss 3.0 one of the most races winning frame went on diet with the release of the Floss 3.0 Lite.
    Pilots loved the Floss 3.0 Lite frame but due to high demand of a True-X version from racers we are happy to introduce the Hyperlite F3LX


    Here is a quick video from Team Pilot Jake Capobres talking about the frame followed by a DVR footage of one of his runs.

     

    Fetaures:

    • 5mm Stubbier more durable arms compared to previous version
    • Soft edge 5mm carbon arms to achieve goals of chamfering without loss of strenght
    • 7075 Grade anodized aluminum core
    • Machined channels in the aluminum plate to prevent arm wiggle
    • Threaded stack screw holes (no need for nuts on the top side to prevent unnecessary  hight between plate and ESC)
    • 59 Grams incluing hardware
    • Protective variable angle TPU FPV camera mount (30~60 degrees)
    • Compatible with Nano FPV cameras ONLY
    • Compatible with 20*20mm stacks ONLY
    • Arms can be easily removed with only 2 screws
    • Countersunk bottom plate screws (recessed below battery pad and flat with the carbon plate)

    Kit Contents:

    • 5 x Carbon Fiber 5mm F3LX 5" arms
    • 1 x 2mm Carbon Fiber Bottom Plate
    • 1 x 7075 Anodized Aluminum Main Plate
    • 1 x 2mm Carbon Fiber Top Plate
    • 1 x Hardware Pack
    • 1 x TPU Printed FPV Camera Mount
    • 1 x TPU Printed Flipstick Mount with Carbon Rod & Plastic Cap
    • 1 x Hyperlite Battery Strap