PyroDrone Hyperlite 2207.5 2722KV TEAM EDITION FPV Racing Drone Motor

5 1

KV: 2722KV
Base casing: Al 7075
Stator: 0.15mm Nippon Steel silicon steel
Configuration: 12N14P
Prop Adapter Shaft Thread: M5
Shaft: Titanium Alloy hollow shaft
No.of Cells(Lipo): 4-6S
Bolt Pattern: M3 (16X16mm)
Bearings: Japanese NMB 9x4x4mm
Rotor: N52H arc magnets
Weight: 29.3g with short SR wires
Wire AWG: 20AWG 16cm length
Bell cap: Al 7075

  • Hyperlite has done it again!
    Our main focus has always been making the lightest motors possible without sacrificing performance and durability.
    This is our new flagship motor HYPERLITE 2207.5 in 4 different KV Variants.

    This motor is nothing like its predecessor 2207 motors.
    The new Hyperlite 2207.5 series was engineered and redesigned from the ground up.

    Main differences:
    - 9mm bearing instead of the 8mm provides smoother operation and much more crash resilient 
    - Less gap between the base and the stator for lower profile mounting and lower overall CG for your build
    - Thinner but wider curved magnets with tighter air gaps for more power and efficiency, also smaller bell overall      diameter compared to the previous 22** motors provides less rotating mass. 
    - Over all weight of the motor is still astonishing  30 grams with short wire, even with the added 0.5mm stator and the 9mm bearings extra weight!


    KV: 2722KV
    Base casing: Al 7075
    Stator: 0.15mm Nippon Steel silicon steel
    Configuration: 12N14P
    Prop Adapter Shaft Thread: M5
    Shaft: Titanium Alloy hollow shaft
    No.of Cells(Lipo): 4-6S
    Bolt Pattern: M3 (16X16mm)
    Bearings: Japanese NMB 9x4x4mm
    Rotor: N52H arc magnets
    Weight: 29.3g with short SR wires
    Wire AWG: 20AWG 16cm length
    Bell cap: Al 7075