Rotor Riot Hypetrain Riot Control F4 Flight Controller

Regular Price: $44.99

Special Price $39.99

The Riot Control Flight Control Board was designed by the Rotor Riot pilots around components that have proven performance.

By placing the gyro in a soft-mounted case and also soft-mounting the board itself, this FC provides very clean signal for easy tuning and smooth flying. The layout of the board is organized with builds and repairs in mind, keeping related wires grouped together to eliminate unnecessary board crossing. 3 UARTs are available for your receiver, VTX telemetry, and other peripherals. This board features inverter jumper pads on UART 1 so it can be used both for inverted SBUS protocols as well as non-inverted protocols such as DSMX or CRSF. 9V power is supplied for your camera and VTX to ensure noise-free video.

Rotor Riot is proud to bring you a board that will deliver simple wiring and smooth flight!

Features
Soft mounted gyro
Soft mounted corner holes
Intuitive solder layout
3 UARTs with a switchable inverter on UART 1 for SBUS
Integrated BetaFlight OSD
Breakout port for 4-in-1

Specifications
IMU: MPU6000 (Soft-Mounted)
MCU: STM32F405
Mounting Pattern: 30.5 x 30.5
Input: 2-6s
Target: OMNIBUSF4
Blackbox: 8MB

OR
  • DESCRIPTION
  • REVIEWS
  • Rotor Riot Hypetrain Riot Control F4 Flight Controller

    The Riot Control Flight Control Board was designed by the Rotor Riot pilots around components that have proven performance.

    STEP-BY-STEP Guide [CLICK HERE]

    By placing the gyro in a soft-mounted case and also soft-mounting the board itself, this FC provides very clean signal for easy tuning and smooth flying. The layout of the board is organized with builds and repairs in mind, keeping related wires grouped together to eliminate unnecessary board crossing. 3 UARTs are available for your receiver, VTX telemetry, and other peripherals. This board features inverter jumper pads on UART 1 so it can be used both for inverted SBUS protocols as well as non-inverted protocols such as DSMX or CRSF. 9V power is supplied for your camera and VTX to ensure noise-free video.

    Rotor Riot is proud to bring you a board that will deliver simple wiring and smooth flight!

    Features

    • Soft mounted gyro 
    • Soft mounted corner holes 
    • Intuitive solder layout 
    • 3 UARTs with a switchable inverter on UART 1 for SBUS
    • Integrated BetaFlight OSD
    • Breakout port for 4-in-1

    Specifications

    • IMU: MPU6000 (Soft-Mounted)
    • MCU: STM32F405
    • Mounting Pattern: 30.5 x 30.5
    • Input: 2-6s
    • Target: OMNIBUSF4
    • Blackbox: 8MB


  • Write A Review For Rotor Riot Hypetrain Riot Control F4 Flight Controller

    How do you rate this product? *

    • Quality
    • Price
    • Value