Speedybee F7 AIO Flight Controller

Speedybee F7 AIO Flight Controller
  • Speedybee F7 AIO Flight Controller

    F7 AIO Flight Controller

    Support 4in1 ESC
    8 PIN connector or Solder Pads Two connection methods
    F7 AIO Flight Controller
    Better support for high currents
    5*5.0V/1*9.0V Output(Max.2.5A)
    F7 AIO Flight Controller
    F7 AIO Flight Controller
    F7 AIO Flight Controller

    BLE Module Integrated 0 configuration

    Setting the FC parameters via mobile device
    iOS 10.0+:iPhone4S, iPad 3rd Gen and later  APP Store
    Android 4.3+:  Google PlayDownload
    Throttle Armed, the Bluetooth module will deactivate automatically
    Throttle Disarmed, the Bluetooth module will activate automatically
    Wiring Guide
    F7 AIO Flight Controller
    Built-in Bluetooth Chip
    Zero configuration, connect to the Speedy Bee App directly after powering on, easy to set the FC parameters
    F7 AIO Flight Controller
    MCU STM32F722
    IMU ICM20689
    Baro BMP280 (I2C)
    OSD BetaFlight OSD w/ AT7456E chip
    BLE Module inner connect to UART3 for remote setting with SpeedyBee App or other similar apps
    BlackBox 32MB onboard dataflash
    Current Sensor 200A(Scale 102)
    BetaFlight Camera Control Pad Yes
    Power input 3s - 6s Lipo
    Power output 5V *5(Including BZ+), the maximum load current is 2.5A. 9V * 1, the maximum load current is 2.5A.
    ESC power output 4 * VCC output
    UART UART Pads * 4(UART1, UART2, UART4, UART5)
    RSSI input RSSI input solder pad
    SmartPort Use Softserial1 to support SmartPort
    I2C Used for external Magnetometer, Sonar, etc.
    Buzzer BZ+ and BZ- pad used for 5V Buzzer
    ESC signal S1 - S5
    LED pin Used for WS2812 LED
    Boot button Used to easy enter DFU mode
    Weight ≈8.8g
    Dimension 36.5*44*7mm