Now with Black Box! A new generation of Talon is here. With a F7 processor and 8S capable, Talon is the only 20X20 on the market with a STM32F722RET6 216MHz processor. Built in Betaflight OSD, 6 UARTS, and dedicated LDOs for cleaner gyro and OSD signals makes Talon F7 the most powerful 20X20 FC on the market. One of the features Talon F4 users praised is the choice of using the 8 pin harness or direct soldering motor ports to the ESC. We’ve kept that option, while still adding more features, by letting you remove the plastic connector to reveal motor ports. Now includes 2 harness cables for direct pin to Spedix GS25A and Airbot Ori32.
Betaflight Target: CLRACINGF7
The included Aikon harness is for the Aikon AK32 30X30 ESC. This was a mistake by us and we are very sorry. Please re-pin for the 20X20 Aikon AK32PIN and Talon Gigawatt as pictured below.
If there is a delay in startup for the CLF7 target, type the commands below in the CLI
resource i2c_sda 2 none
resource i2c_scl 2 none
this will fix the delay start up problem
For Talon F7 with Black Box please set your voltage scale to 81 for it to work properly
WARNING! If you remove the JST connector to direct solder, the pinout is not the same as the JST connector. Please use the diagram below to see the correct pinout. Please pay attention to VBAT and Ground!
Looking for the perfect 6S companion for your Talon FC? Good news! The Talon Gigawatt has arrived!
STM32PINF0 Micro processor
Adjustable brake force
Programmable PWM frequency of up to 48KHz
Auto-timing for higher efficiency and reliability
BLHeli_32 code base
Constant Current: 35A
Burst Current: 45A
Mounting Holes: 20X20
Weight( with/wire): 10g
Signal wire length: 100mm
Battery wire length: 100mm
* New batches of Talon F4 & Talon F7 will come with a plug and play harness.